广告
返回顶部
首页 > 资讯 > 数据库 >一次MySQL Slave库恢复实战记录
  • 785
分享到

一次MySQL Slave库恢复实战记录

一次MySQLSlave库恢复实战记录 2021-02-06 19:02:17 785人浏览 绘本
摘要

mysql> show slave statusG; *************************** 1. row *************************** Slave_io_State:

一次MySQL Slave库恢复实战记录

mysql> show slave statusG;
*************************** 1. row ***************************
               Slave_io_State: Waiting for master to send event
                  Master_Host: *.*.*.*
                  Master_User: dbsync
                  Master_Port: 3306
                Connect_Retry: 60
              Master_Log_File: Mysql-bin.000095
          Read_Master_Log_Pos: 869242147
               Relay_Log_File: mysqld-relay-bin.000146
                Relay_Log_Pos: 871280529
        Relay_Master_Log_File: mysql-bin.000075
             Slave_IO_Running: Yes
            Slave_SQL_Running: No
              Replicate_Do_DB: cdb,cdb_admin
          Replicate_Ignore_DB: mysql
           Replicate_Do_Table: 
       Replicate_Ignore_Table: 
      Replicate_Wild_Do_Table: 
  Replicate_Wild_Ignore_Table: 
                   Last_Errno: 1594
                   Last_Error: Relay log read failure: Could not parse relay log event entry. The possible reasons are: the master"s binary log is corrupted (you can check this by running "mysqlbinlog" on the binary log), the slave"s relay log is corrupted (you can check this by running "mysqlbinlog" on the relay log), a network problem, or a bug in the master"s or slave"s MySQL code. If you want to check the master"s binary log or slave"s relay log, you will be able to know their names by issuing "SHOW SLAVE STATUS" on this slave.
                 Skip_Counter: 0
          Exec_Master_Log_Pos: 871280384
              Relay_Log_Space: 19994786573
              Until_Condition: None
               Until_Log_File: 
                Until_Log_Pos: 0
           Master_SSL_Allowed: No
           Master_SSL_CA_File: 
           Master_SSL_CA_Path: 
              Master_SSL_Cert: 
            Master_SSL_Cipher: 
               Master_SSL_Key: 
        Seconds_Behind_Master: NULL
Master_SSL_Verify_Server_Cert: No
                Last_IO_Errno: 0
                Last_IO_Error: 
               Last_SQL_Errno: 1594
               Last_SQL_Error: Relay log read failure: Could not parse relay log event entry. The possible reasons are: the master"s binary log is corrupted (you can check this by running "mysqlbinlog" on the binary log), the slave"s relay log is corrupted (you can check this by running "mysqlbinlog" on the relay log), a network problem, or a bug in the master"s or slave"s MySQL code. If you want to check the master"s binary log or slave"s relay log, you will be able to know their names by issuing "SHOW SLAVE STATUS" on this slave.
1 row in set (0.00 sec)

ERROR: 
No query specified

原因:
我在master节点上删除了名称为mysql-bin.00007格式的文件,其中包括mysql-bin.000075,因此,slave库找不到该文件,无法同步。

解决办法:

  1. 在slave库上重新指定同步位置。(不可行)

    slave stop;
    CHANGE MASTER TO MASTER_LOG_FILE="mysql-bin.000095",MASTER_LOG_POS=869242147; //mysql master节点上mysql-bin.000095的已有位置
    slave start;

    slave节点上show slave status,依然报错,具体的报错内容没有复制下来,只记得errno为1236,Slave_IO_Running进程不运行,Slave_SQL_Running进程运行,大概描述就是某个库的某个表有问题。
    在多次尝试指定不同的同步位置(报错的位置,master上mysql-bin-000095刚写过的位置)依然存在该错误。
    实际上,表记录已经有问题,就拿描述中提出的那个表来说,slave库存放了约1200条记录,master库则有1900+的记录。除非手工将这些数据补上,否则由于记录操作数据的日志已经丢失(被我删除),是找不到最近的一致的日志操作执行位置的。

  2. 重做slave库。
    由于数据差异太大,而且我觉得不光一张表出现了数据不一样的问题,所以干净点,把从库重做。

1)比对master、slave节点库配置信息,保证一致。(我不知道为什么设置了双主模式,实际上我只有一个实例跑在master节点上啊?)

2)在master、slave节点上查看流量情况(show processlist),保证要重做的slave库上没有业务的流量接入。

3)停止master节点上slave进程。(这个停了以后,我就没开过,不知道有没有问题,待观察)

4)记录master节点上库的日志记录位置,之后备份数据库

mysql> show master status;
+------------------+-----------+-------------------------------+------------------+
| File             | Position  | Binlog_Do_DB                  | Binlog_Ignore_DB |
+------------------+-----------+-------------------------------+------------------+
| mysql-bin.000095 | 871760173 | cdb,cdb_admin | mysql            |
+------------------+-----------+-------------------------------+------------------+
1 row in set (0.01 sec)
 mysqldump -u root -p --databases cdb,cdb_admin > bak.master.sql

5)保险起见,备份slave节点库:
mysqldump -u root -p --databases cdb,cdb_admin > bak.slave.sql

6)重做开始:把master库备份文件复制到slave节点上,导入该备份文件
mysql -u root -p < bak.master.sql

7)在slave节点上,重新指定读master日志的位置:

slave stop;
CHANGE MASTER TO MASTER_LOG_FILE="mysql-bin.000095",MASTER_LOG_POS=871760173; //POS为刚才记录的master节点日志记录位置
slave start;

8)slave节点上 show slave status;此时Slave_IO_Running,Slave_SQL_Running均运行起来了,刷新slave status,Read_Master_Log_Pos数值也开始增加,重新开始同步了。郑州人工授精医院:Http://yyk.39.net/hospital/fc964_labs.html

总结:
清理文件时,要注意mysql-bin文件在master、slave节点日志读取和写的位置啊!删之前一定要确认日志位置在master和slave断已被读过,不要乱删,否则搞得slave库无法同步了,就算在slave节点上强行指定master日志读取位置或者跳过该错误,也不排除slave库上数据丢失的可能。

您可能感兴趣的文档:

--结束END--

本文标题: 一次MySQL Slave库恢复实战记录

本文链接: https://www.lsjlt.com/news/6214.html(转载时请注明来源链接)

有问题或投稿请发送至: 邮箱/279061341@qq.com    QQ/279061341

本篇文章演示代码以及资料文档资料下载

下载Word文档到电脑,方便收藏和打印~

下载Word文档
猜你喜欢
软考高级职称资格查询
编程网,编程工程师的家园,是目前国内优秀的开源技术社区之一,形成了由开源软件库、代码分享、资讯、协作翻译、讨论区和博客等几大频道内容,为IT开发者提供了一个发现、使用、并交流开源技术的平台。
  • 官方手机版

  • 微信公众号

  • 商务合作