C++实现算法两个数字相加详解

2024-04-02 19:04:59 703人浏览独家记忆

摘要

Add Two Numbers 两个数字相加 You have two numbers represented by a linked list, where each n

Add Two Numbers 两个数字相加

You have two numbers represented by a linked list, where each node contains a single digit. The digits are stored in reverse order, such that the 1's digit is at the head of the list. Write a function that adds the two numbers and returns the sum as a linked list.
EXAMPLE
Input: (7-> 1 -> 6) + (5 -> 9 -> 2).That is, 617 + 295.
Output: 2 -> 1 -> 9.That is, 912.
FOLLOW UP
Suppose the digits are stored in forward order. Repeat the above problem.
EXAMPLE
Input: (6 -> 1 -> 7) + (2 -> 9 -> 5).That is, 617 + 295.
Output: 9 -> 1 -> 2.That is, 912.

LeetCode上的原题，请参考另一篇文档Add Two Numbers 两个数字相加。

跟那道LeetCode有所不同的是，这道题还有个Follow Up，把链表存的数字方向变了，原来是表头存最低位，现在是表头存最高位。既然是翻转了链表，那么一种直接的解法是把两个输入链表都各自翻转一下，然后用之前的方法相加完成，再把得到的结果翻转一次，就是结果了，翻转链表的方法可以参考另一篇文档Reverse Linked List 倒置链表。代码如下：

解法一：


// Follow up
class Solution {
public:
    ListNode *addTwoNumbers(ListNode *l1, ListNode *l2) {
        ListNode *dummy = new ListNode(-1);
        ListNode *cur = dummy;
        int carry = 0;
        l1 = reverseList(l1);
        l2 = reverseList(l2);
        while (l1 || l2) {
            int n1 = l1 ? l1->val : 0;
            int n2 = l2 ? l2->val : 0;
            int sum = n1 + n2 + carry;
            carry = sum / 10;
            cur->next = new ListNode(sum % 10);
            cur = cur->next;
            if (l1) l1 = l1->next;
            if (l2) l2 = l2->next;
        }
        if (carry) cur->next = new ListNode(1);
        return reverseList(dummy->next);
    }
    ListNode *reverseList(ListNode *head) {
        if (!head) return head;
        ListNode *dummy = new ListNode(-1);
        dummy->next = head;
        ListNode *cur = head;
        while (cur->next) {
            ListNode *tmp = cur->next;
            cur->next = tmp->next;
            tmp->next = dummy->next;
            dummy->next = tmp;
        }
        return dummy->next;
    }
};

如果我们不采用翻转链表的方法该怎么做呢，这就比较复杂了。首先我们要县分别计算出两个链表的长度，然后给稍短一点的链表前面补0，补到和另一个链表相同的长度。由于要从低位开始相加，而低位是链表的末尾，所以我们采用递归来处理，先遍历到链表的末尾，然后从后面相加，进位标示符carry用的是引用，这样保证了再递归回溯时值可以正确传递，每次计算的节点后面接上上一次回溯的节点，直到回到首节点完成递归。最后还是处理最高位的进位问题。代码如下：

解法二：


// Follow up
class Solution {
public:
    ListNode *addTwoNumbers(ListNode *l1, ListNode *l2) {
        int n1 = 0, n2 = 0, carry = 0;;
        n1 = getLength(l1);
        n2 = getLength(l2);
        if (n1 > n2) l2 = padList(l2, n1 - n2);
        if (n2 > n1) l1 = padList(l1, n2 - n1);
        ListNode *res = addTwoNumbersDFS(l1, l2, carry);
        if (carry == 1) {
            ListNode *tmp = new ListNode(1);
            tmp->next = res;
            res = tmp;
        }
        return res;
    }
    ListNode *addTwoNumbersDFS(ListNode *l1, ListNode *l2, int &carry) {
        if (!l1 && !l2) return NULL;
        ListNode *list = addTwoNumbersDFS(l1->next, l2->next, carry);
        int sum = l1->val + l2->val + carry;
        ListNode *res = new ListNode(sum % 10);
        res->next = list;
        carry = sum / 10;
        return res;
    }
    ListNode *padList(ListNode *list, int len) {
        ListNode *dummy = new ListNode(-1);
        ListNode *cur = dummy;
        for (int i = 0; i < len; ++i) {
            cur->next = new ListNode(0);
            cur = cur->next;
        }
        cur->next = list;
        return dummy->next;
    }
    int getLength(ListNode *list) {
        ListNode *cur = list;
        int res = 0;
        while (cur) {
            ++res;
            cur = cur->next;
        }
        return res;
    }
};

到此这篇关于c++实现算法两个数字相加详解的文章就介绍到这了,更多相关C++实现两个数字相加内容请搜索编程网以前的文章或继续浏览下面的相关文章希望大家以后多多支持编程网！

点击免费下载>>软考高级考试备考技巧/历年真题/备考精华资料

--结束END--

本文标题: C++实现算法两个数字相加详解

本文链接: https://www.lsjlt.com/news/130120.html(转载时请注明来源链接)

有问题或投稿请发送至: 邮箱/279061341@qq.com QQ/279061341