基于docker安装zabbix的详细教程

[root@s01 ~]# fdisk -l

Disk /dev/vda: 64.4 GB, 64424509440 bytes, 125829120 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x0001598a

   Device Boot      Start         End      Blocks   Id  System
/dev/vda1            2048     8390655     4194304   82  linux swap / Solaris
/dev/vda2   *     8390656   125829086    58719215+  83  Linux

Disk /dev/vdb: 107.4 GB, 107374182400 bytes, 209715200 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes

[root@s01 ~]# lsblk
NAME   MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
vda    253:0    0   60G  0 disk
├─vda1 253:1    0    4G  0 part [SWAP]
└─vda2 253:2    0   56G  0 part /
vdb    253:16   0  100G  0 disk
[root@s01 ~]# fdisk /dev/vdb
Welcome to fdisk (util-linux 2.23.2).

Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0x4dee972c.

Command (m for help): n
Partition type:
   p   primary (0 primary, 0 extended, 4 free)
   e   extended
Select (default p):
Using default response p
Partition number (1-4, default 1):
First sector (2048-209715199, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-209715199, default 209715199):
Using default value 209715199
Partition 1 of type Linux and of size 100 GiB is set

Command (m for help): p

Disk /dev/vdb: 107.4 GB, 107374182400 bytes, 209715200 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x4dee972c

   Device Boot      Start         End      Blocks   Id  System
/dev/vdb1            2048   209715199   104856576   83  Linux

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.
[root@s01 ~]# lsblk
NAME   MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
vda    253:0    0   60G  0 disk
├─vda1 253:1    0    4G  0 part [SWAP]
└─vda2 253:2    0   56G  0 part /
vdb    253:16   0  100G  0 disk
└─vdb1 253:17   0  100G  0 part

[root@s01 ~]# pvcreate /dev/vdb1
  Physical volume "/dev/vdb1" successfully created.
[root@s01 ~]# pvs
  PV         VG Fmt  Attr PSize    PFree
  /dev/vdb1     lvm2 ---  <100.00g <100.00g

[root@s01 ~]# vGCreate vg0 /dev/vdb1
  Volume group "vg0" successfully created
[root@s01 ~]# vgs
  VG  #PV #LV #SN Attr   VSize    VFree
  vg0   1   0   0 wz--n- <100.00g <100.00g

[root@s01 ~]# lvcreate -l 100%VG -n lv_1 vg0
  Logical volume "lv_1" created.
[root@s01 ~]# lvs
  LV   VG  Attr       LSize    Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
  lv_1 vg0 -wi-a----- <100.00g

[root@s01 ~]# mkfs.xfs /dev/vg0/lv_1
meta-data=/dev/vg0/lv_1          isize=512    agcount=4, agsize=6553344 blks
         =                       sectsz=512   attr=2, projid32bit=1
         =                       crc=1        finobt=0, sparse=0
data     =                       bsize=4096   blocks=26213376, imaxpct=25
         =                       sunit=0      swidth=0 blks
naming   =version 2              bsize=4096   ascii-ci=0 ftype=1
log      =internal log           bsize=4096   blocks=12799, version=2
         =                       sectsz=512   sunit=0 blks, lazy-count=1
realtime =none                   extsz=4096   blocks=0, rtextents=0

[root@s01 ~]# mkdir /data

[root@s01 ~]# mount /dev/vg0/lv_1 /data

[root@s01 ~]# df -Th
Filesystem           Type      Size  Used Avail Use% Mounted on
devtmpfs             devtmpfs  7.8G     0  7.8G   0% /dev
tmpfs                tmpfs     7.8G     0  7.8G   0% /dev/shm
tmpfs                tmpfs     7.8G  8.7M  7.8G   1% /run
tmpfs                tmpfs     7.8G     0  7.8G   0% /sys/fs/cgroup
/dev/vda2            ext3       55G  2.7G   50G   6% /
/dev/mapper/vg0-lv_1 xfs       100G   33M  100G   1% /data
tmpfs                tmpfs     1.6G     0  1.6G   0% /run/user/0

# vi /etc/fstab
# 新增内容：
/dev/vg0/lv_1  /data xfs    defaults        1 2

# 查看操作系统版本
$ cat /etc/redhat-release
Centos Linux release 7.2.1511 (Core)
# 安装docker
$ yum install -y docker
# 查看docker版本
$ docker -v
Docker version 1.13.1, build 7d71120/1.13.1

$ docker -v
Docker version 1.13.1, build 7d71120/1.13.1

# 停止docker
$ systemctl stop docker
# 设置docker新存储路径
$ mv /var/lib/docker /data/docker

# 修改docker路径
$ vim /etc/docker/daemon.JSON
{
    "reGIStry-mirrors": ["https://docker.mirrors.ustc.edu.cn"],
    "graph": "/data/docker"
}
# 启动docker
$ systemctl start docker

# 查看docker进程信息
$ docker info

# 1.bridge模式
docker默认网络模式。此模式将容器连接到一个docker0虚拟网桥，通过docker0网桥以及Iptables nat表配置与宿主机通信。开启的容器会自动分配和IP在一个网段的ip地址，并且开启的容器的ip以IP为基础递增关闭容器之后，ip会自动释放。bridge模式只有宿主机才能与运行在其上面的容器进行通信。
# 2.host模式
容器将不会虚拟出自己的网卡，配置自己的IP等，而是直接与宿主机的共享P和端口。
如果启动容器的时候使用host模式，那么这个容器将不会获得一个独立的Network Namespace，而是和宿主机共用一个Network Namespace。容器将不会虚拟出自己的网卡，配置自己的IP等，而是使用宿主机的IP和端口。但是，容器的其他方面，如文件系统、进程列表等还是和宿主机隔离的。
使用host模式的容器可以直接使用宿主机的IP地址与外界通信，容器内部的服务端口也可以使用宿主机的端口，不需要进行NAT，host最大的优势就是网络性能比较好，但是docker host上已经使用的端口就不能再用了，网络的隔离性不好，网络的安全性变差。
# 3.none模式
该模式关闭了容器的网络功能。
使用none模式，Docker容器拥有自己的Network Namespace，但是，并不为Docker容器进行任何网络配置。也就是说，这个Docker容器没有网卡、IP、路由等信息。需要我们自己为Docker容器添加网卡、配置IP等。
这种网络模式下容器只有lo回环网络，没有其他网卡。none模式可以在容器创建时通过–network=none来指定。这种类型的网络没有办法联网，封闭的网络能很好的保证容器的安全性。

# 创建专用于 Zabbix 组件容器的网络
$ docker network create --subnet 172.20.0.0/16 --ip-range 172.20.240.0/20 zabbix-net

# 查看的docker network
$ docker network ls
NETWORK ID          NAME                DRIVER              SCOPE
14c25119dd06        bridge              bridge              local
4e2782140647        host                host                local
b25888b8c26a        none                null                local
cfc3bf2124af        zabbix-net          bridge              local

# 查看新增的网络
$ ip a
5: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default
    link/ether 02:42:31:ce:6a:ce brd ff:ff:ff:ff:ff:ff
    inet 172.17.0.1/16 scope global docker0
       valid_lft forever preferred_lft forever

6: br-cfc3bf2124af: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default
    link/ether 02:42:cd:35:b7:4c brd ff:ff:ff:ff:ff:ff
    inet 172.20.240.0/16 scope global br-cfc3bf2124af
       valid_lft forever preferred_lft forever

$ mysql -uroot -p -h 192.168.1.2
passWord  root_pwd
mysql> create database zabbix character set utf8 collate utf8_bin;
mysql> create user zabbix@192.168.1.1 identified by '123456';
mysql> grant all privileges on zabbix.* to zabbix@192.168.1.1;
mysql> quit;

$ docker pull mysql

# -----------------------------------------------
# 创建mysql服务器实例
# 注意：此命令用于创建mysql容器实例后提取配置文件，如果已有配置文件，可直接进入下一步：
$ docker run --name mysql-server -t \
-e MYSQL_DATABASE="zabbix" \
-e MYSQL_USER="zabbix" \
-e MYSQL_PASSWORD="123456" \
-e MYSQL_ROOT_PASSWORD="root_pwd" \
-e TZ=Asia/Shanghai \
--network=zabbix-net \
--ip=172.20.240.1 \
-p 3306:3306 \
-d mysql:latest \
--character-set-server=utf8 --collation-server=utf8_bin \
--default-authentication-plugin=mysql_native_password

# -----------------------------------------------
# 创建mysql配置与数据存储路径
$ mkdir -p /app/mysql/conf
$ mkdir -p /app/mysql/data
# 拷贝已有mysql配置文件到宿主机目录
$ docker cp mysql-server:/etc/mysql/ /app/mysql/conf/

# 使用新路径创建mysql-server
$ docker run --name mysql-server -t \
-e MYSQL_DATABASE="zabbix" \
-e MYSQL_USER="zabbix" \
-e MYSQL_PASSWORD="123456" \
-e MYSQL_ROOT_PASSWORD="root_pwd" \
-e TZ=Asia/Shanghai \
-v /app/mysql/conf:/etc/mysql \
-v /app/mysql/data:/var/lib/mysql \
--network=zabbix-net \
--ip=172.20.240.1 \
-p 3306:3306 \
-d mysql:latest \
--character-set-server=utf8 --collation-server=utf8_bin \
--default-authentication-plugin=mysql_native_password

# 关于mysql容器重启策略
问题描述：
如果创建mysql容器时指定--restart参数，则无法启动容器
--restart unless-stopped \
解决办法：
需要创建后，手工更新容器重启策略：
$ docker update --restart=unless-stopped mysql-server

# 查看启动日志
$ docker logs mysql-server
2022-04-15 05:43:59+00:00 [Note] [Entrypoint]: Entrypoint script for MySQL Server 8.0.28-1debian10 started.
2022-04-15 05:43:59+00:00 [Note] [Entrypoint]: Switching to dedicated user 'mysql'
2022-04-15 05:43:59+00:00 [Note] [Entrypoint]: Entrypoint script for MySQL Server 8.0.28-1debian10 started.
2022-04-15T05:44:00.942337Z 0 [System] [MY-010116] [Server] /usr/sbin/mysqld (mysqld 8.0.28) starting as process 1

# 查看进程
$ docker ps
CONTAINER ID        IMAGE               COMMAND                  CREATED             STATUS              PORTS                               NAMES
28c91f44958a        mysql:latest        "docker-entrypoint..."   22 hours aGo        Up 5 minutes        0.0.0.0:3306->3306/tcp, 33060/tcp   mysql-server

# 连接mysql
$ docker exec -it mysql-server /bin/bash
root@28c91f44958a:/# whereis mysql
mysql: /usr/bin/mysql /usr/lib/mysql /etc/mysql
root@28c91f44958a:/# mysql -u root -p
Enter password:
Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 8
Server version: 8.0.28 MySQL CommUnity Server - GPL

Copyright (c) 2000, 2022, oracle and/or its affiliates.

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> show databases;
+--------------------+
| Database           |
+--------------------+
| infORMation_schema |
| mysql              |
| performance_schema |
| sys                |
+--------------------+
4 rows in set (0.01 sec)

firewall-cmd --zone=public --add-port=3306/tcp --permanent
firewall-cmd --reload
firewall-cmd --zone=public --list-ports

# 运行zabbix-java-gateway
$ docker run --name zabbix-java-gateway -t \
-e TZ=Asia/Shanghai \
--network=zabbix-net \
--ip=172.20.240.2 \
--restart unless-stopped \
-d zabbix/zabbix-java-gateway:latest

# 查看进程
$ docker ps
CONTAINER ID        IMAGE                               COMMAND                  CREATED             STATUS              PORTS               NAMES
85a594ad32d9        zabbix/zabbix-java-gateway:latest   "docker-entrypoint..."   9 seconds ago       Up 9 seconds        10052/tcp           zabbix-java-gateway

# 查看日志
$ docker logs zabbix-java-gateway
** Preparing Zabbix Java Gateway
** Preparing Zabbix Java Gateway log configuration file
Updating /etc/zabbix/zabbix_java_gateway_logback.xml 'DebugLevel' parameter: 'info'... updated
2022-04-15 06:43:36.232 [main] INFO  com.zabbix.gateway.JavaGateway - Zabbix Java Gateway 6.0.3 (revision 506e2b5) has started
2022-04-15 06:43:36.247 [main] INFO  com.zabbix.gateway.JavaGateway - listening on 0.0.0.0/0.0.0.0:10052

# ------------------------------------------------
# 安装zabbix-server(latest版本基于Alphine Linux)
$ docker run --name zabbix-server-mysql -t \
-e DB_SERVER_HOST="192.168.1.2" \
-e MYSQL_DATABASE="zabbix" \
-e MYSQL_USER="zabbix" \
-e MYSQL_PASSWORD="123456" \
-e MYSQL_ROOT_PASSWORD="root_pwd" \
-e ZBX_JAVAGATEWAY="zabbix-java-gateway" \
-e TZ=Asia/Shanghai \
--network=zabbix-net \
--ip=172.20.240.3 \
-p 10051:10051 \
--restart unless-stopped \
-d zabbix/zabbix-server-mysql:latest

# 不需要的参数
# --link mysql-server:mysql \
# --link zabbix-java-gateway \

# ------------------------------------------------
# 使用外部存储目录
# 创建zabbix-server配置目录
$ mkdir -p /data/zabbix/conf
$ mkdir -p /data/zabbix/alertscripts
# 拷贝zabbix配置文件
$ docker cp zabbix-server-mysql:/etc/zabbix/zabbix_server.conf /data/zabbix/conf
$ ll /data/zabbix/conf
total 28
-rw-rw-r-- 1 root root 24804 May 30 15:14 zabbix_server.conf

# 移除容器
$ docker stop zabbix-server-mysql
$ docker rm zabbix-server-mysql
# 重新创建容器
$ docker run --name zabbix-server-mysql -t \
-e DB_SERVER_HOST="192.168.1.2" \
-e MYSQL_DATABASE="zabbix" \
-e MYSQL_USER="zabbix" \
-e MYSQL_PASSWORD="123456" \
-e MYSQL_ROOT_PASSWORD="root_pwd" \
-e ZBX_JAVAGATEWAY="zabbix-java-gateway" \
-e TZ=Asia/Shanghai \
-v /data/zabbix/conf/zabbix_server.conf:/etc/zabbix/zabbix_server.conf \
-v /data/zabbix/alertscripts:/usr/lib/zabbix/alertscripts \
--network=zabbix-net \
--ip=172.20.240.3 \
-p 10051:10051 \
--restart unless-stopped \
-d zabbix/zabbix-server-mysql:latest

# 查看日志，此版本是：5.4.9
$ docker logs zabbix-server-mysql
Starting Zabbix Server. Zabbix 5.4.9 (revision d81e506).

# 将企业微信发送脚本：pyweixin.py，存储到目录：alertscripts
$ cd /data/zabbix/alertscripts
$ vim pyweixin.py
$ chmod +x pyweixin.py

# 修改python3地址
# 微信脚本默认的Python3地址为与实际不符：
#!/usr/local/python3/bin/python3.5
# 需要修改为以下地址：
#!/usr/bin/python3

# 使用root用户进入容器安装python
$ docker exec --privileged -u root -it zabbix-server-mysql /bin/bash
$ cat /etc/issue
Welcome to Alpine Linux 3.14
Kernel \r on an \m (\l)

# 修改Alpine镜像源
$ sed -i s/dl-cdn.alpinelinux.org/mirrors.aliyun.com/g /etc/apk/repositories
# 安装python
$ apk add --update --no-cache curl jq py3-configobj py3-pip py3-setuptools python3 python3-dev
# 验证python3版本
$ python3 -V
Python 3.9.5

# 开启防火墙
$ systemctl enable firewalld
$ systemctl start firewalld

# 添加防火墙端口
firewall-cmd --zone=public --add-port=10051/tcp --permanent
firewall-cmd --reload
firewall-cmd --zone=public --list-ports

# 创建容器
$ docker run --name zabbix-web-nginx-mysql -t \
-e ZBX_SERVER_HOST="zabbix-server-mysql" \
-e DB_SERVER_HOST="192.168.1.2" \
-e MYSQL_DATABASE="zabbix" \
-e MYSQL_USER="zabbix" \
-e MYSQL_PASSWORD="123456" \
-e MYSQL_ROOT_PASSWORD="root_pwd" \
-e PHP_TZ=Asia/Shanghai \
-e TZ=Asia/Shanghai \
--network=zabbix-net \
--ip=172.20.240.4 \
-p 80:8080 \
--restart unless-stopped \
-d zabbix/zabbix-web-nginx-mysql:latest

# 取消以下参数
# --link mysql-server:mysql \
# --link zabbix-server-mysql:zabbix-server \

# 查看日志
$ docker logs zabbix-web-nginx-mysql
** Deploying Zabbix web-interface (Nginx) with MySQL database
** Using MYSQL_USER variable from ENV
** Using MYSQL_PASSWORD variable from ENV
********************
* DB_SERVER_HOST: mysql-server
* DB_SERVER_PORT: 3306
* DB_SERVER_DBNAME: zabbix
********************
** Adding Zabbix virtual host (Http)
**** Impossible to enable SSL support for Nginx. Certificates are missed.
** Preparing Zabbix frontend configuration file

# 进程列表
$ docker ps
CONTAINER ID        IMAGE                                  COMMAND                  CREATED             STATUS              PORTS                               NAMES
a707c1ff30c9        zabbix/zabbix-web-nginx-mysql:latest   "docker-entrypoint.sh"   6 minutes ago       Up 6 minutes        8443/tcp, 0.0.0.0:80->8080/tcp      zabbix-web-nginx-mysql
27f3c4948691        zabbix/zabbix-server-mysql:latest      "/sbin/tini -- /us..."   24 hours ago        Up About an hour    0.0.0.0:10051->10051/tcp            zabbix-server-mysql
fa0a386f2459        zabbix/zabbix-java-gateway:latest      "docker-entrypoint..."   25 hours ago        Up About an hour    10052/tcp                           zabbix-java-gateway

firewall-cmd --zone=public --add-port=80/tcp --permanent
firewall-cmd --reload
firewall-cmd --zone=public --list-ports

# 经过上述配置后，Zabbix 前端已准备就绪！ 默认用户名是Admin，密码zabbix。
http://192.168.1.1
# 访问zabbix-web服务时，发现监控首页提示错误：
Zabbix agent is not available (for 3m)
需要安装zabbix-agent，并配置zabbix-agent的ip，详见下面小结：

$ rpm -Uvh https://repo.zabbix.com/zabbix/5.4/rhel/7/x86_64/zabbix-release-5.4-1.el7.noarch.rpm
$ yum clean all

$ yum install -y zabbix-agent

# 配置agent,设置服务端地址
$ vim /etc/zabbix/zabbix_agentd.conf
# 如果在zabbix-server上安装agent，需要配置zabbix-server的docker地址：
Server=172.20.240.3
ServerActive=172.20.240.3
# 如果在被监控服务器上安装agent，需要配置zabbix-server的宿主机地址：
Server=192.168.1.1
ServerActive=192.168.1.1

# 注释掉Hostname配置，让agent自动解析
# Hostname=****
# 如果操作系统不允许创建zabbix用户，需要使用root运行agent，修改配置：
AllowRoot=1

$ systemctl enable zabbix-agent
$ systemctl restart zabbix-agent
$ systemctl status zabbix-agent

firewall-cmd --zone=public --add-port=10050/tcp --permanent
firewall-cmd --reload
firewall-cmd --zone=public --list-ports