C++ OpenCV实现物体尺寸测量示例详解

2024-04-02 19:04:59 937人浏览独家记忆

摘要

目录前言一、图像透视矫正二、物体定位三、尺寸测量四、效果显示五、源码总结前言本文将使用OpenCV c++ 进行物体尺寸测量。具体来说就是先定位到待测物体的位置，然后测量物体的宽高

前言

本文将使用OpenCV c++ 进行物体尺寸测量。具体来说就是先定位到待测物体的位置，然后测量物体的宽高。

一、图像透视矫正

原图如图所示。本案例的需求是测量图片中两张卡片的尺寸。首先，我们得定位到两张卡片的位置。第一步，我们首先得将白色A4纸切割出来，这样方便定位到两张卡片所在位置。这里用到的算法是图像透视矫正，具体可以参考OpenCV C++案例实战四《图像透视矫正》

//图像矫正
void getWarp(Mat src, Mat &Warp)
{
	Mat gray;
	cvtColor(src, gray, COLOR_BGR2GRAY);

	Mat thresh;
	threshold(gray, thresh, 0, 255, THRESH_BINARY | THRESH_OTSU);

	Mat kernel = getStructuringElement(MORPH_RECT, Size(5, 5));
	Mat open;
	morphologyEx(thresh, open, MORPH_OPEN, kernel);

	vector<vector<Point>>contours;
	findContours(open, contours, RETR_EXTERNAL, CHaiN_APPROX_SIMPLE);
	vector<vector<Point>>conPoly(contours.size());
	vector<Point>srcPts;

	//找到最大轮廓
	int MaxIndex = 0;
	double Area = 0;
	for (int i = 0; i < contours.size(); i++)
	{
		double area = contourArea(contours[i]);
		if (area > Area)
		{
			Area = area;
			MaxIndex = i;
		}
	}

	//获取矩形四个角点
	double peri = arcLength(contours[MaxIndex], true);
	approxPolyDP(contours[MaxIndex], conPoly[MaxIndex], 0.02*peri, true);

	srcPts = { conPoly[MaxIndex][0],conPoly[MaxIndex][1],conPoly[MaxIndex][2],conPoly[MaxIndex][3] };

	int T_L, B_L, B_R, T_R;
	int width = src.cols / 2;
	int height = src.rows / 2;
	for (int i = 0; i < srcPts.size(); i++)
	{
		if (srcPts[i].x < width && srcPts[i].y < height)
		{
			T_L = i;
		}
		if (srcPts[i].x < width && srcPts[i].y > height)
		{
			B_L = i;
		}
		if (srcPts[i].x > width && srcPts[i].y > height)
		{
			B_R = i;
		}
		if (srcPts[i].x > width && srcPts[i].y < height)
		{
			T_R = i;
		}
	}

	double UpWidth = EuDis(srcPts[T_L], srcPts[T_R]);
	double DownWidth = EuDis(srcPts[B_L], srcPts[B_R]);
	double MaxWidth = max(UpWidth, DownWidth);

	double UpHeight = EuDis(srcPts[T_L], srcPts[B_L]);
	double DownHeight = EuDis(srcPts[T_R], srcPts[B_R]);
	double MaxHeight = max(UpHeight, DownHeight);

	//透视变换进行图像矫正
	Point2f SrcAffinePts[4] = { Point2f(srcPts[T_L]),Point2f(srcPts[T_R]) ,Point2f(srcPts[B_R]) ,Point2f(srcPts[B_L]) };
	Point2f DstAffinePts[4] = { Point2f(0,0),Point2f(MaxWidth,0),Point2f(MaxWidth,MaxHeight),Point2f(0,MaxHeight) };

	Mat M = getPerspectiveTransfORM(SrcAffinePts, DstAffinePts);
	warpPerspective(src, Warp, M, Point(MaxWidth, MaxHeight));

}

效果如图所示。接下来，我们需要定位两张卡片所在位置，寻找特征。

二、物体定位

//获取物体坐标
void FindPts(Mat &Warp, vector<vector<Point>>&TargetPts)
{

	Mat gray;
	cvtColor(Warp, gray, COLOR_BGR2GRAY);

	Mat thresh;
	threshold(gray, thresh, 0, 255, THRESH_BINARY_INV | THRESH_OTSU);

	Mat kernel = getStructuringElement(MORPH_RECT, Size(3, 3));
	Mat open;
	morphologyEx(thresh, open, MORPH_OPEN, kernel);

	vector<vector<Point>>contours;
	findContours(open, contours, RETR_EXTERNAL, CHAIN_APPROX_SIMPLE);
	vector<vector<Point>>conPoly(contours.size());
	//定位卡片四个角点
	for (int i = 0; i < contours.size(); i++)
	{
		double area = contourArea(contours[i]);

		if (area > 1000)
		{
			double peri = arcLength(contours[i], true);

			approxPolyDP(contours[i], conPoly[i], 0.02*peri, true);

			vector<Point>temp;
			temp = { conPoly[i][0],conPoly[i][1], conPoly[i][2], conPoly[i][3] };

			TargetPts.push_back(temp);
		}
	}
}

如图所示。通过上面代码段，我们已经定位出卡片的四个角点。接下来，只需根据角点位置就可以计算卡片的宽高了。

三、尺寸测量

//计算距离
void DrawAndCompute(Mat &Warp, vector<vector<Point>>&TargetPts)
{
	for (int i = 0; i < TargetPts.size(); i++)
	{
		for (int j = 0; j < TargetPts[i].size(); j++)
		{
			//尺寸测量
			Point PtA = Point(TargetPts[i][j]);
			Point PtB = Point(TargetPts[i][(j + 1) % TargetPts[i].size()]);
			double dis = round(EuDis(PtA, PtB) * 100) / 100;

			//效果显示
			circle(Warp, TargetPts[i][j], 5, Scalar(0, 255, 0), -1);
			line(Warp, PtA, PtB, Scalar(0, 0, 255), 2);
			char text[20];
			sprintf_s(text, "%.2f", dis);
			Point point = Point((PtA.x + PtB.x) / 2, (PtA.y + PtB.y) / 2);
			putText(Warp, text, point, FONT_HERSHEY_SIMPLEX, 1, Scalar(255, 0, 255), 2);
		}
	}
}

四、效果显示

五、源码

#include<iOStream>
#include<opencv2/opencv.hpp>
using namespace std;
using namespace cv;

//欧式距离
double EuDis(Point pt1, Point pt2)
{
	return sqrt((pt2.x - pt1.x)*(pt2.x - pt1.x) + (pt2.y - pt1.y)*(pt2.y - pt1.y));
}

//图像矫正
void getWarp(Mat src, Mat &Warp)
{
	Mat gray;
	cvtColor(src, gray, COLOR_BGR2GRAY);

	Mat thresh;
	threshold(gray, thresh, 0, 255, THRESH_BINARY | THRESH_OTSU);

	Mat kernel = getStructuringElement(MORPH_RECT, Size(5, 5));
	Mat open;
	morphologyEx(thresh, open, MORPH_OPEN, kernel);

	vector<vector<Point>>contours;
	findContours(open, contours, RETR_EXTERNAL, CHAIN_APPROX_SIMPLE);
	vector<vector<Point>>conPoly(contours.size());
	vector<Point>srcPts;

	//找到最大轮廓
	int MaxIndex = 0;
	double Area = 0;
	for (int i = 0; i < contours.size(); i++)
	{
		double area = contourArea(contours[i]);
		if (area > Area)
		{
			Area = area;
			MaxIndex = i;
		}
	}

	//获取矩形四个角点
	double peri = arcLength(contours[MaxIndex], true);
	approxPolyDP(contours[MaxIndex], conPoly[MaxIndex], 0.02*peri, true);

	srcPts = { conPoly[MaxIndex][0],conPoly[MaxIndex][1],conPoly[MaxIndex][2],conPoly[MaxIndex][3] };

	int T_L, B_L, B_R, T_R;
	int width = src.cols / 2;
	int height = src.rows / 2;
	for (int i = 0; i < srcPts.size(); i++)
	{
		if (srcPts[i].x < width && srcPts[i].y < height)
		{
			T_L = i;
		}
		if (srcPts[i].x < width && srcPts[i].y > height)
		{
			B_L = i;
		}
		if (srcPts[i].x > width && srcPts[i].y > height)
		{
			B_R = i;
		}
		if (srcPts[i].x > width && srcPts[i].y < height)
		{
			T_R = i;
		}
	}

	double UpWidth = EuDis(srcPts[T_L], srcPts[T_R]);
	double DownWidth = EuDis(srcPts[B_L], srcPts[B_R]);
	double MaxWidth = max(UpWidth, DownWidth);

	double UpHeight = EuDis(srcPts[T_L], srcPts[B_L]);
	double DownHeight = EuDis(srcPts[T_R], srcPts[B_R]);
	double MaxHeight = max(UpHeight, DownHeight);

	//透视变换进行图像矫正
	Point2f SrcAffinePts[4] = { Point2f(srcPts[T_L]),Point2f(srcPts[T_R]) ,Point2f(srcPts[B_R]) ,Point2f(srcPts[B_L]) };
	Point2f DstAffinePts[4] = { Point2f(0,0),Point2f(MaxWidth,0),Point2f(MaxWidth,MaxHeight),Point2f(0,MaxHeight) };

	Mat M = getPerspectiveTransform(SrcAffinePts, DstAffinePts);
	warpPerspective(src, Warp, M, Point(MaxWidth, MaxHeight));

}

//获取物体坐标
void FindPts(Mat &Warp, vector<vector<Point>>&TargetPts)
{

	Mat gray;
	cvtColor(Warp, gray, COLOR_BGR2GRAY);

	Mat thresh;
	threshold(gray, thresh, 0, 255, THRESH_BINARY_INV | THRESH_OTSU);

	Mat kernel = getStructuringElement(MORPH_RECT, Size(3, 3));
	Mat open;
	morphologyEx(thresh, open, MORPH_OPEN, kernel);

	vector<vector<Point>>contours;
	findContours(open, contours, RETR_EXTERNAL, CHAIN_APPROX_SIMPLE);
	vector<vector<Point>>conPoly(contours.size());
	//定位卡片四个角点
	for (int i = 0; i < contours.size(); i++)
	{
		double area = contourArea(contours[i]);

		if (area > 1000)
		{
			double peri = arcLength(contours[i], true);

			approxPolyDP(contours[i], conPoly[i], 0.02*peri, true);

			vector<Point>temp;
			temp = { conPoly[i][0],conPoly[i][1], conPoly[i][2], conPoly[i][3] };

			TargetPts.push_back(temp);
		}
	}
}

//计算距离
void DrawAndCompute(Mat &Warp, vector<vector<Point>>&TargetPts)
{
	for (int i = 0; i < TargetPts.size(); i++)
	{
		for (int j = 0; j < TargetPts[i].size(); j++)
		{
			//尺寸测量
			Point PtA = Point(TargetPts[i][j]);
			Point PtB = Point(TargetPts[i][(j + 1) % TargetPts[i].size()]);
			double dis = round(EuDis(PtA, PtB) * 100) / 100;

			//效果显示
			circle(Warp, TargetPts[i][j], 5, Scalar(0, 255, 0), -1);
			line(Warp, PtA, PtB, Scalar(0, 0, 255), 2);
			char text[20];
			sprintf_s(text, "%.2f", dis);
			Point point = Point((PtA.x + PtB.x) / 2, (PtA.y + PtB.y) / 2);
			putText(Warp, text, point, FONT_HERSHEY_SIMPLEX, 1, Scalar(255, 0, 255), 2);
		}
	}
}

int main()
{
	Mat src = imread("src.jpg");
	if (src.empty())
	{
		cout << "No Image!" << endl;
		system("pause");
		return -1;
	}

	Mat Warp;
	getWarp(src, Warp);

	vector<vector<Point>>TargetPts;	
	FindPts(Warp, TargetPts);

	DrawAndCompute(Warp, TargetPts);

	imshow("Warp", Warp);
	waiTKEy(0);
	destroyAllwindows();
	system("pause");
	return 0;
}

总结

本文使用OpenCV C++ 进行物体尺寸测量，关键步骤有以下几点。

1、图像透视矫正。方便定位物体所在位置。

2、物体定位。定位所需物体位置，获取特征。

3、根据已知特征进行计算。

以上就是C++ OpenCV实现物体尺寸测量示例详解的详细内容，更多关于C++ OpenCV物体尺寸测量的资料请关注编程网其它相关文章！

点击免费下载>>软考高级考试备考技巧/历年真题/备考精华资料

--结束END--

本文标题: C++ OpenCV实现物体尺寸测量示例详解

本文链接: https://www.lsjlt.com/news/162073.html(转载时请注明来源链接)

有问题或投稿请发送至: 邮箱/279061341@qq.com QQ/279061341

本篇文章演示代码以及资料文档资料下载

下载Word文档到电脑，方便收藏和打印～

下载Word文档

去做题

猜你喜欢

C++ OpenCV实现物体尺寸测量示例详解

目录前言一、图像透视矫正二、物体定位三、尺寸测量四、效果显示五、源码总结前言本文将使用OpenCV C++ 进行物体尺寸测量。具体来说就是先定位到待测物体的位置，然后测量物体的宽高...

99+

2022-11-12
Python+Opencv实现物体尺寸测量的方法详解

目录1、效果展示2、项目介绍3、项目搭建4、utils.py文件代码展示与讲解5、项目代码展示与讲解6、项目资源7、项目总结1、效果展示我们将以两种方式来展示我们这个项目的效果。 ...

99+

2022-11-11
OpenCV实现单目尺寸估计的案例详解

一个摄像头无法获取深度信息，两个摄像头双目标定可以实现双目测距。但是我现在只有一个摄像头，如果想实现测量尺寸，我的思路：选一张固定尺寸的背景，例如一张A4纸，从图像中提取A4纸并进...

99+

2022-11-12
Python OpenCV实现图形检测示例详解

目录1. 轮廓识别与描绘1.1 cv2.findComtours()方法1.2 cv2.drawContours() 方法1.3 代码示例2. 轮廓拟合2.1 矩形包围框拟合 - c...

99+

2022-11-10
Python实现图像尺寸和格式转换处理的示例详解

实现代码 # batch_handle_image.py import argparse import glob import os from PIL import Image ...

99+

2023-05-14

Python实现图像尺寸获取 Python图像格式转换 Python图像
C语言实现单元测试的示例详解

目录前沿使用前提测试框架如下测试方法编写文件验证前沿单元测试（unit testing），是指对软件中的最小可测试单元进行检查和验证。对于单元测试中单元的含义，一般来说，要根据实际...

99+

2022-11-13