docker搭建es集群实现过程详解

# es镜像
docker pull docker.elastic.co/elasticsearch/elasticsearch:7.6.2
# kibana镜像
docker pull docker.elastic.co/kibana/kibana:7.6.2

# kibana数据挂载的目录
mkdir data/kibana
# 三个节点数据挂载的目录
mkdir data/node1
mkdir data/node2
mkdir data/node3

#
## ** THIS IS AN AUTO-GENERATED FILE **
##
#  
#  # Default Kibana configuration for docker target
server.name: kibana
server.host: "0"
elasticsearch.hosts: [ "Http://es01:9200","http://es02:9200","http://es03:9200" ]
xpack.monitoring.ui.container.elasticsearch.enabled: true
i18n.locale: zh-CN

# ======================== Elasticsearch Configuration =========================
#
# NOTE: Elasticsearch comes with reasonable defaults for most settings.
#       Before you set out to tweak and tune the configuration, make sure you
#       understand what are you trying to accomplish and the consequences.
#
# The primary way of configuring a node is via this file. This template lists
# the most important settings you may want to configure for a production cluster.
#
# Please consult the documentation for further infORMation on configuration options:
# https://www.elastic.co/guide/en/elasticsearch/reference/index.html
#
# ---------------------------------- Cluster -----------------------------------
#
# Use a descriptive name for your cluster:
#
 cluster.name: es-cluster
#
# ------------------------------------ Node ------------------------------------
#
# Use a descriptive name for the node:
#
 node.name: es01
#
# Add custom attributes to the node:
#
#node.attr.rack: r1
#
# ----------------------------------- Paths ------------------------------------
#
# Path to directory where to store the data (separate multiple locations by comma):
#
#path.data: /path/to/data
#
# Path to log files:
#
#path.logs: /path/to/logs
#
# ----------------------------------- Memory -----------------------------------
#
# Lock the memory on startup:
#
#bootstrap.memory_lock: true
#
# Make sure that the heap size is set to about half the memory available
# on the system and that the owner of the process is allowed to use this
# limit.
#
# Elasticsearch performs poorly when the system is swapping the memory.
#
# ---------------------------------- Network -----------------------------------
#
# Set the bind address to a specific IP (IPv4 or IPv6):
#
 network.host: 0.0.0.0
#
# Set a custom port for HTTP:
#
 http.port: 9200
#
# For more information, consult the network module documentation.
#
# --------------------------------- Discovery ----------------------------------
#
# Pass an initial list of hosts to perform discovery when this node is started:
# The default list of hosts is ["127.0.0.1", "[::1]"]
#
 discovery.seed_hosts: ["es01","es02","es03"]
#
# Bootstrap the cluster using an initial set of master-eligible nodes:
#
 cluster.initial_master_nodes: ["es01","es02","es03"]
# bootstrap.memory_lock: true
#
# For more information, consult the discovery and cluster formation module documentation.
#
# ---------------------------------- Gateway -----------------------------------
#
# Block initial recovery after a full cluster restart until N nodes are started:
#
#gateway.recover_after_nodes: 3
#
# For more information, consult the gateway module documentation.
#
# ---------------------------------- Various -----------------------------------
#
# Require explicit names when deleting indices:
#
#action.destructive_requires_name: true
 http.cors.enabled: true
 http.cors.allow-origin: '*'
 http.cors.allow-headers: Authorization,X-Requested-With,Content-Length,Content-Type
 node.master: true

FROM docker.elastic.co/elasticsearch/elasticsearch:7.6.2
COPY --chown=elasticsearch:elasticsearch elasticsearch.yml /usr/share/elasticsearch/config/
ADD ik /usr/share/elasticsearch/plugins/ik
ADD ik/config /data/erms/es/node1/ik/config

# ======================== Elasticsearch Configuration =========================
#
# NOTE: Elasticsearch comes with reasonable defaults for most settings.
#       Before you set out to tweak and tune the configuration, make sure you
#       understand what are you trying to accomplish and the consequences.
#
# The primary way of configuring a node is via this file. This template lists
# the most important settings you may want to configure for a production cluster.
#
# Please consult the documentation for further information on configuration options:
# https://www.elastic.co/guide/en/elasticsearch/reference/index.html
#
# ---------------------------------- Cluster -----------------------------------
#
# Use a descriptive name for your cluster:
#
 cluster.name: es-cluster
#
# ------------------------------------ Node ------------------------------------
#
# Use a descriptive name for the node:
#
 node.name: es02
#
# Add custom attributes to the node:
#
#node.attr.rack: r1
#
# ----------------------------------- Paths ------------------------------------
#
# Path to directory where to store the data (separate multiple locations by comma):
#
#path.data: /path/to/data
#
# Path to log files:
#
#path.logs: /path/to/logs
#
# ----------------------------------- Memory -----------------------------------
#
# Lock the memory on startup:
#
#bootstrap.memory_lock: true
#
# Make sure that the heap size is set to about half the memory available
# on the system and that the owner of the process is allowed to use this
# limit.
#
# Elasticsearch performs poorly when the system is swapping the memory.
#
# ---------------------------------- Network -----------------------------------
#
# Set the bind address to a specific IP (IPv4 or IPv6):
#
 network.host: 0.0.0.0
#
# Set a custom port for HTTP:
#
 http.port: 9200
#
# For more information, consult the network module documentation.
#
# --------------------------------- Discovery ----------------------------------
#
# Pass an initial list of hosts to perform discovery when this node is started:
# The default list of hosts is ["127.0.0.1", "[::1]"]
#
 discovery.seed_hosts: ["es01","es02","es03"]
#
# Bootstrap the cluster using an initial set of master-eligible nodes:
#
 cluster.initial_master_nodes: ["es01","es02","es03"]
# bootstrap.memory_lock: true
#
# For more information, consult the discovery and cluster formation module documentation.
#
# ---------------------------------- Gateway -----------------------------------
#
# Block initial recovery after a full cluster restart until N nodes are started:
#
#gateway.recover_after_nodes: 3
#
# For more information, consult the gateway module documentation.
#
# ---------------------------------- Various -----------------------------------
#
# Require explicit names when deleting indices:
#
#action.destructive_requires_name: true
 http.cors.enabled: true
 http.cors.allow-origin: '*'
 http.cors.allow-headers: Authorization,X-Requested-With,Content-Length,Content-Type
 node.data: true

# ======================== Elasticsearch Configuration =========================
#
# NOTE: Elasticsearch comes with reasonable defaults for most settings.
#       Before you set out to tweak and tune the configuration, make sure you
#       understand what are you trying to accomplish and the consequences.
#
# The primary way of configuring a node is via this file. This template lists
# the most important settings you may want to configure for a production cluster.
#
# Please consult the documentation for further information on configuration options:
# https://www.elastic.co/guide/en/elasticsearch/reference/index.html
#
# ---------------------------------- Cluster -----------------------------------
#
# Use a descriptive name for your cluster:
#
 cluster.name: es-cluster
#
# ------------------------------------ Node ------------------------------------
#
# Use a descriptive name for the node:
#
 node.name: es03
#
# Add custom attributes to the node:
#
#node.attr.rack: r1
#
# ----------------------------------- Paths ------------------------------------
#
# Path to directory where to store the data (separate multiple locations by comma):
#
#path.data: /path/to/data
#
# Path to log files:
#
#path.logs: /path/to/logs
#
# ----------------------------------- Memory -----------------------------------
#
# Lock the memory on startup:
#
#bootstrap.memory_lock: true
#
# Make sure that the heap size is set to about half the memory available
# on the system and that the owner of the process is allowed to use this
# limit.
#
# Elasticsearch performs poorly when the system is swapping the memory.
#
# ---------------------------------- Network -----------------------------------
#
# Set the bind address to a specific IP (IPv4 or IPv6):
#
 network.host: 0.0.0.0
#
# Set a custom port for HTTP:
#
 http.port: 9200
#
# For more information, consult the network module documentation.
#
# --------------------------------- Discovery ----------------------------------
#
# Pass an initial list of hosts to perform discovery when this node is started:
# The default list of hosts is ["127.0.0.1", "[::1]"]
#
 discovery.seed_hosts: ["es01","es02","es03"]
#
# Bootstrap the cluster using an initial set of master-eligible nodes:
#
 cluster.initial_master_nodes: ["es01","es02","es03"]
# bootstrap.memory_lock: true
#
# For more information, consult the discovery and cluster formation module documentation.
#
# ---------------------------------- Gateway -----------------------------------
#
# Block initial recovery after a full cluster restart until N nodes are started:
#
#gateway.recover_after_nodes: 3
#
# For more information, consult the gateway module documentation.
#
# ---------------------------------- Various -----------------------------------
#
# Require explicit names when deleting indices:
#
#action.destructive_requires_name: true
 http.cors.enabled: true
 http.cors.allow-origin: '*'
 http.cors.allow-headers: Authorization,X-Requested-With,Content-Length,Content-Type
 node.data: true

version: '3'
services:
  es01:
    image: ${image}
    container_name: es01
    environment:
      - discovery.seed_hosts=es02,es03
      - cluster.initial_master_nodes=es01,es02,es03
      - "ES_JAVA_OPTS=-Xms512m -Xmx512m"
    ulimits:
      memlock:
        soft: -1
        hard: -1
    volumes:
      - ./data/node1/data:/usr/share/elasticsearch/data
      - ./data/node1/elasticsearch.yml:/usr/share/elasticsearch/config/elasticsearch.yml
      - ./data/node1/plugins:/usr/share/elasticsearch/plugins
    ports:
      - 9200:9200
    networks:
      - elastic
  es02:
    image: ${image}
    container_name: es02
    environment:
      - discovery.seed_hosts=es01,es03
      - cluster.initial_master_nodes=es01,es02,es03
      - "ES_JAVA_OPTS=-Xms512m -Xmx512m"
    ulimits:
      memlock:
        soft: -1
        hard: -1
    volumes:
      - ./data/node2/data:/usr/share/elasticsearch/data
      - ./data/node2/elasticsearch.yml:/usr/share/elasticsearch/config/elasticsearch.yml
      - ./data/node2/plugins:/usr/share/elasticsearch/plugins
    ports:
      - 9201:9201
    networks:
      - elastic
  es03:
    image: ${image}
    container_name: es03
    environment:
      - discovery.seed_hosts=es01,es02
      - cluster.initial_master_nodes=es01,es02,es03
      - "ES_JAVA_OPTS=-Xms512m -Xmx512m"
    ulimits:
      memlock:
        soft: -1
        hard: -1
    volumes:
      - ./data/node3/data:/usr/share/elasticsearch/data
      - ./data/node3/elasticsearch.yml:/usr/share/elasticsearch/config/elasticsearch.yml
      - ./data/node3/plugins:/usr/share/elasticsearch/plugins
    ports:
      - 9202:9202
    networks:
      - elastic
  kibana:
    image: ${image_kibana}
    container_name: kibana
    depends_on:
      - es01
    environment:
      ELASTICSEARCH_URL: http://es01:9200
      ELASTICSEARCH_HOSTS: http://es01:9200
    volumes:
      - ./data/kibana/kibana.yml:/usr/share/kibana/config/kibana.yml
    networks:
      - elastic
    ports:
      - 5601:5601
networks:
  elastic:
    driver: bridge

image=m/es
image_kibana=docker.elastic.co/kibana/kibana:7.6.2

docker build -t m/es .

docker-compose up -d