这篇文章主要介绍了linux系统如何安装OpenStack，具有一定借鉴价值，感兴趣的朋友可以参考下，希望大家阅读完这篇文章之后大有收获，下面让小编带着大家一起了解一下。OpenStack是一个开源的云计算管理平台项目，是一系列软件开源项目
这篇文章主要介绍了linux系统如何安装OpenStack，具有一定借鉴价值，感兴趣的朋友可以参考下，希望大家阅读完这篇文章之后大有收获，下面让小编带着大家一起了解一下。
OpenStack是一个开源的云计算管理平台项目，是一系列软件开源项目的组合。为私有云和公有云提供可扩展的弹性的云计算服务。
OpenStack 是当今最具影响力的云计算管理工具——通过命令或者基于 WEB 的可视化控制面板来管理 IaaS 云端的资源池（服务器、存储和网络）。
它最先由美国国家航空航天局（NASA）和 Rackspace 在 2010 年合作研发，现在参与的人员和组织汇集了来自 100 多个国家的超过 9500 名的个人和 850 多个世界上赫赫有名的企业，如 NASA、谷歌、惠普、Intel、IBM、微软等。
1、selinux和firewalld状态为disabled
2、各主机信息如下：
| 主机 | ip |
|---|---|
| server1（控制节点—controller）。内存至少2G | 172.25.83.1 |
| server2（计算节点—compute）。内存至少2G | 172.25.83.1 |
3、可以将openstack的帮助文档，全部下载到本地，然后放到httpd服务的默认发布目录下，进行查看。
[root@foundation83 ~]# ll /var/www/html/ total 12 drw-r--r--. 5 root root 4096 Apr 18 16:53 install-guide-rdo dr-xr-xr-x. 10 root root 4096 Oct 20 2016 rhel7.3 [root@foundation83 ~]# chmod -R Go+x /var/www/html/install-guide-rdo/ #该该目录赋予可读的权限 [root@foundation83 ~]# ll /var/www/html/ total 12 drw-r-xr-x. 5 root root 4096 Apr 18 16:53 install-guide-rdo dr-xr-xr-x. 10 root root 4096 Oct 20 2016 rhel7.3浏览器进行访问
【1】、添加一块网卡：
[root@server1 ~]# ip a #两块网卡(eth0和eth2) 1: lo:mtu 65536 qdisc noqueue state UNKNOWN qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0:mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 52:54:00:fb:25:1b brd ff:ff:ff:ff:ff:ff inet 172.25.83.1/24 brd 172.25.83.255 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fefb:251b/64 scope link valid_lft forever preferred_lft forever 3: eth2:mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 52:54:00:28:4a:31 brd ff:ff:ff:ff:ff:ff【2】、将第一个接口配置为管理网络接口：
[root@server1 ~]# cd /etc/sysconfig/network-scripts/ [root@server1 network-scripts]# vim ifcfg-eth0 1 BOOTPROTO=none 2 NAME=eth0 3 DEVICE=eth0 4 ONBOOT=yes 5 IPADDR=172.25.83.1 6 NETMASK=255.255.255.0 7 GATEWAY=172.25.83.83 8 DNS1=114.114.114.114【3】、提供者网络接口使用一个特殊的配置，不分配给它IP地址。并进行激活
[root@server1 network-scripts]# cp ifcfg-eth0 ifcfg-eth2 [root@server1 network-scripts]# vim ifcfg-eth2 1 BOOTPROTO=none 2 DEVICE=eth2 3 ONBOOT=yes [root@server1 network-scripts]# ifup eth2 #激活eth2网卡 [root@server1 network-scripts]# ip addr show eth2 3: eth2:mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 52:54:00:28:4a:31 brd ff:ff:ff:ff:ff:ff inet6 fe80::5054:ff:fe28:4a31/64 scope link valid_lft forever preferred_lft forever【1】、设置节点主机名为 controller。
[root@server1 ~]# hostnamectl set-hostname controller [root@server1 ~]# logout Connection to 172.25.83.1 closed. [student@foundation83 ~]$ ssh root@172.25.83.1 root@172.25.83.1's passWord: [root@controller ~]# hostname controller【2】、编辑 /etc/hosts 文件包含以下内容：
[root@controller ~]# vim /etc/hosts 172.25.83.1 controller 172.25.83.2 compute1 172.25.83.3 block1我这里配置虚拟机server1和server2同步我的物理机
#配置物理机,允许其他主机同步该物理机的时间 [root@foundation83 ~]# vim /etc/chrony.conf #将第22行修改为如下的内容,允许172.25网段的主机同步该主机 22 allow 172.25/16 [root@foundation83 ~]# systemctl restart chronyd.service #修改万配置文件之后,重启chronyd服务 [root@foundation83 ~]# systemctl enable chronyd.service #设置chronyd服务开机自启【1】、安装软件包：
[root@controller ~]# yum install chrony -y【2】、编辑 /etc/chrony.conf 文件：
[root@controller ~]# vim /etc/chrony.conf #删除第4行,第5行,第6行;并将第3行改为如下的内容 3 server 172.25.83.83 iburst【3】、启动chronyd服务并将其配置为随系统启动：
[root@controller ~]# systemctl restart chronyd [root@controller ~]# chronyc sources -v #查看是否同步成功 210 Number of sources = 1 .-- Source mode '^' = server, '=' = peer, '#' = local clock. / .- Source state '*' = current synced, '+' = combined , '-' = not combined, | / '?' = unreachable, 'x' = time may be in error, '~' = time too variable. || .- xxxx [ yyyy ] +/- zzzz || Reachability reGISter (octal) -. | xxxx = adjusted offset, || Log2(Polling interval) --. | | yyyy = measured offset, || \ | | zzzz = estimated error. || | | \ MS Name/IP address Stratum Poll Reach LastRx Last sample =============================================================================== ^* foundation83.ilt.example. 3 6 17 2 -4352ns[+1000ns] +/- 123ms [root@controller ~]# systemctl enable chronyd [root@controller ~]# systemctl is-enabled chronyd #判断chronyd服务是否开机自启 enabled将有关Openstack软件包mitaka目录（在网上下载的）放置在httpd服务的默认发布目录/var/www/html目录下
[root@foundation83 ~]# ll -d /var/www/html/mitaka/ drwx------. 3 root root 16384 Apr 18 17:41 /var/www/html/mitaka/ [root@foundation83 ~]# chmod -R go+rx /var/www/html/mitaka/ [root@foundation83 ~]# ll -d /var/www/html/mitaka/ drwxr-xr-x. 3 root root 16384 Apr 18 17:41 /var/www/html/mitaka/web界面进行访问，看能否访问到
（1）编辑yun源
[root@controller ~]# vim /etc/yum.repos.d/openstack.repo [openstack] name=mitaka baseurl=Http://172.25.83.83/mitaka gpGCheck=0 [root@controller ~]# yum clean all [root@controller ~]# yum repolist dvd rhel7.3 4,751 openstack mitaka 279 repolist: 5,030（2）安装Openstack软件包
[root@controller ~]# yum upgrade -y #在主机上升级包[root@controller ~]# yum install python-openstackclient -y #安装 OpenStack 客户端【1】、安装软件包：
[root@controller ~]# yum install mariadb mariadb-server Python2-PyMySQL -y【2】、创建并编辑 /etc/my.cnf.d/openstack.cnf，然后完成如下动作：
[root@controller ~]# vim /etc/my.cnf.d/openstack.cnf 1 [Mysqld] 2 bind-address = 172.25.83.1 3 default-storage-engine = innodb 4 innodb_file_per_table 5 max_connections = 4096 6 collation-server = utf8_general_ci 7 character-set-server = utf8 #其中第二行表示：在 [mysqld] 部分，设置 ``bind-address``值为控制节点的管理网络IP地址以使得其它节点可以通过管理网络访问数据库： 3-7行表示：在``[mysqld]`` 部分，设置如下键值来启用一起有用的选项和 UTF-8 字符集：【1】、启动数据库服务，并将其配置为开机自启：
[root@controller ~]# systemctl enable mariadb.service [root@controller ~]# systemctl start mariadb.service【2】、为了保证数据库服务的安全性，运行mysql_secure_installation脚本。特别需要说明的是，为数据库的root用户设置一个适当的密码。
[root@controller ~]# mysql_secure_installation #第一个敲空格,其余均敲y【1】、安装包：
[root@controller ~]# yum install RabbitMQ-server -y【2】、启动消息队列服务并将其配置为随系统启动：
[root@controller ~]# systemctl enable rabbitMQ-server.service [root@controller ~]# systemctl start rabbitmq-server.service【3】、添加 openstack 用户：
[root@controller ~]# rabbitmqctl add_user openstack openstack #设置openstack用户的密码为openstack Creating user "openstack" ...【4】、给openstack用户配置写和读权限：
[root@controller ~]# rabbitmqctl set_permissions openstack ".*" ".*" ".*" Setting permissions for user "openstack" in vhost "/" ...测试授权是否成功
[root@controller ~]# rabbitmq-plugins enable rabbitmq_managementThe following plugins have been enabled: mochiweb webMachine rabbitmq_web_dispatch amqp_client rabbitmq_management_agent rabbitmq_management Applying plugin configuration to rabbit@controller... started 6 plugins.[root@controller ~]# netstat -antulpe | grep 15672tcp 0 0 0.0.0.0:15672 0.0.0.0:* LISTEN 995 37418 12150/beam用户名guest，密码guest
点击“Login”进行登陆
点击“Admin”
点击“openstack”
从上图，我们可以看到给openstack用户授权成功。
【1】、安装软件包：
[root@controller ~]# yum install memcached python-memcached -y【2】、编辑配置文件/etc/sysconfig/memcached
[root@controller ~]# vim /etc/sysconfig/memcached #将其中的第5行进行注释即可 1 PORT="11211" 2 USER="memcached" 3 MAXCONN="1024" 4 CACHESIZE="64" 5 #OPTIONS="-l 127.0.0.1,::1"【1】、启动Memcached服务，配置它随机启动，并查看11211端口是否打开
[root@controller ~]# systemctl enable memcached.service [root@controller ~]# systemctl start memcached.service [root@controller ~]# netstat -antulpe | grep 11211 tcp 0 0 0.0.0.0:11211 0.0.0.0:* LISTEN 994 38500 13127/memcached【1】、完成下面的步骤以创建数据库：
[root@controller ~]# mysql -u root -p #用数据库连接客户端以 root 用户连接到数据库服务器 Enter password: #输入密码 MariaDB [(none)]> CREATE DATABASE keystone; #创建 keystone 数据库： Query OK, 1 row affected (0.00 sec) MariaDB [(none)]> GRANT ALL PRIVILEGES ON keystone.* TO 'keystone'@'localhost' \ -> IDENTIFIED BY 'keystone'; #对``keystone``数据库授予恰当的权限 Query OK, 0 rows affected (0.00 sec) MariaDB [(none)]> GRANT ALL PRIVILEGES ON keystone.* TO 'keystone'@'%' IDENTIFIED BY 'keystone'; #对``keystone``数据库授予恰当的权限 Query OK, 0 rows affected (0.00 sec) MariaDB [(none)]> ^DBye #退出数据库客户端。【2】、生成一个随机值在初始的配置中作为管理员的令牌。
[root@controller ~]# openssl rand -hex 10ca34150208112479d7b3【1】、运行以下命令来安装包
[root@controller ~]# yum install openstack-keystone httpd mod_wsgi -y【2】、编辑文件 /etc/keystone/keystone.conf 并完成如下动作：
查看配置文件/etc/keystone/keystone.conf中有那些组件
[root@controller ~]# vim /etc/keystone/keystone.conf #在``[DEFAULT]``部分，定义初始管理令牌的值： [DEFAULT] admin_token = ca34150208112479d7b3 #在 [database] 部分，配置数据库访问： [database] connection = mysql+pymysql://keystone:keystone@controller/keystone #在``[token]``部分，配置Fernet UUID令牌的提供者。 [token] provider = fernet【3】、初始化身份认证服务的数据库，并登陆数据库查看是否认证成功
[root@controller ~]# su -s /bin/sh -c "keystone-manage db_sync" keystone [root@controller ~]# mysql -uroot -p Enter password: MariaDB [(none)]> use keystone; MariaDB [keystone]> show tables; +------------------------+ | Tables_in_keystone | +------------------------+ | access_token | | assignment | | config_register | | consumer | | credential | | domain | | endpoint | | endpoint_group | | federated_user | | federation_protocol | | group | | id_mapping | | identity_provider | | idp_remote_ids | | implied_role | | local_user | | mapping | | migrate_version | | password | | policy | | policy_association | | project | | project_endpoint | | project_endpoint_group | | region | | request_token | | revocation_event | | role | | sensitive_config | | service | | service_provider | | token | | trust | | trust_role | | user | | user_group_membership | | whitelisted_config | +------------------------+ 37 rows in set (0.00 sec) MariaDB [keystone]> ^DBye #按"Ctrl+d"退出数据库客户端【4】、初始化Fernet keys，并测试是否初始化成功
[root@controller ~]# keystone-manage fernet_setup --keystone-user keystone --keystone-group keystone [root@controller ~]# cd /etc/keystone/ #该目录下生成了fernet-keys目录,表示初始化成功 [root@controller keystone]# ll total 100 -rw-r----- 1 root keystone 2303 Sep 22 2016 default_catalog.templates drwx------ 2 keystone keystone 24 Apr 18 19:50 fernet-keys -rw-r----- 1 root keystone 73221 Apr 18 19:42 keystone.conf -rw-r----- 1 root keystone 2400 Sep 22 2016 keystone-paste.ini -rw-r----- 1 root keystone 1046 Sep 22 2016 logging.conf -rw-r----- 1 keystone keystone 9699 Sep 22 2016 policy.JSON -rw-r----- 1 keystone keystone 665 Sep 22 2016 sso_callback_template.html【1】、编辑/etc/httpd/conf/httpd.conf 文件，配置ServerName 选项为控制节点：
[root@controller ~]# vim /etc/httpd/conf/httpd.conf #在第96行添加如下的内容 96 ServerName controller【2】、创建文件 /etc/httpd/conf.d/wsgi-keystone.conf，并进行编辑
[root@controller ~]# vim /etc/httpd/conf.d/wsgi-keystone.conf Listen 5000 Listen 35357 WSGIDaemonProcess keystone-public processes=5 threads=1 user=keystone group=keystone display-name=%{GROUP} WSGIProcessGroup keystone-public WSGIScriptAlias / /usr/bin/keystone-wsgi-public WSGIApplicationGroup %{GLOBAL} WSGIPassAuthorization On ErrorLogFORMat "%{cu}t %M" ErrorLog /var/log/httpd/keystone-error.log CustomLog /var/log/httpd/keystone-access.log combined Require all granted WSGIDaemonProcess keystone-admin processes=5 threads=1 user=keystone group=keystone display-name=%{GROUP} WSGIProcessGroup keystone-admin WSGIScriptAlias / /usr/bin/keystone-wsgi-admin WSGIApplicationGroup %{GLOBAL} WSGIPassAuthorization On ErrorLogFormat "%{cu}t %M" ErrorLog /var/log/httpd/keystone-error.log CustomLog /var/log/httpd/keystone-access.log combined Require all granted【1】、启动 Apache HTTP 服务并配置其随系统启动，并查看80端口，5000端口和35357端口是否已经打开
[root@controller ~]# systemctl enable httpd.service [root@controller ~]# systemctl start httpd.service [root@controller ~]# netstat -antulpe | grep 80 tcp6 0 0 :::80 :::* LISTEN 0 25943 2827/httpd [root@controller ~]# netstat -antulpe | grep 5000 tcp6 0 0 :::5000 :::* LISTEN 0 25951 2827/httpd [root@controller ~]# netstat -antulpe | grep 35357 tcp6 0 0 :::35357 :::* LISTEN 0 25955 2827/httpd【1】、配置认证令牌：
[root@controller ~]# export OS_TOKEN=ca34150208112479d7b3【2】、配置端点URL：
[root@controller ~]# export OS_URL=http://controller:35357/v3【3】、配置认证 API 版本：
[root@controller ~]# export OS_IDENTITY_API_VERSION=3【1】、在你的Openstack环境中，认证服务管理服务目录。服务使用这个目录来决定您的环境中可用的服务。
创建服务实体和身份认证服务：
[root@controller ~]# openstack service create \ > --name keystone --description "OpenStack Identity" identity +-------------+----------------------------------+ | Field | Value | +-------------+----------------------------------+ | description | OpenStack Identity | | enabled | True | | id | e0109484377e4886b385fdf8e9467f79 | | name | keystone | | type | identity | +-------------+----------------------------------+【2】、身份认证服务管理了一个与您环境相关的 API 端点的目录。服务使用这个目录来决定如何与您环境中的其他服务进行通信。OpenStack使用三个API端点变种代表每种服务：admin，internal和public。默认情况下，管理API端点允许修改用户和 租户而公共和内部APIs不允许这些操作。在生产环境中，处于安全原因，变种为了服务不同类型的用户可能驻留在单独的网络上。对实例而言，公共API网络 为了让顾客管理他们自己的云在互联网上是可见的。管理API网络在管理云基础设施的组织中操作也是有所限制的。内部API网络可能会被限制在包含 OpenStack服务的主机上。此外，OpenStack支持可伸缩性的多区域。为了简单起见，本指南为所有端点变种和默认RegionOne 区域都使用管理网络。
创建认证服务的 API 端点：
[root@controller ~]# openstack endpoint create --region RegionOne \> identity public http://controller:5000/v3+--------------+----------------------------------+| Field | Value |+--------------+----------------------------------+| enabled | True || id | b622d05e1cf14b9aa46ce0b67fc282d8 || interface | public || region | RegionOne || region_id | RegionOne || service_id | e0109484377e4886b385fdf8e9467f79 || service_name | keystone || service_type | identity || url | http://controller:5000/v3 |+--------------+----------------------------------+ [root@controller ~]# openstack endpoint create --region RegionOne \> identity internal http://controller:5000/v3+--------------+----------------------------------+| Field | Value |+--------------+----------------------------------+| enabled | True || id | fb5705a8143D4cc7a912c18df7f499c6 || interface | internal || region | RegionOne || region_id | RegionOne || service_id | e0109484377e4886b385fdf8e9467f79 || service_name | keystone || service_type | identity || url | http://controller:5000/v3 |+--------------+----------------------------------+ [root@controller ~]# openstack endpoint create --region RegionOne \> identity admin http://controller:35357/v3+--------------+----------------------------------+| Field | Value |+--------------+----------------------------------+| enabled | True || id | 1316fa22cd1b402dbb7795804878007f || interface | admin || region | RegionOne || region_id | RegionOne || service_id | e0109484377e4886b385fdf8e9467f79 || service_name | keystone || service_type | identity || url | http://controller:35357/v3 |+--------------+----------------------------------+查看服务实体，身份认证服务和API端点是否创建成功
#方法一：非交互模式进行查看(缺点是命令不能补齐) [root@controller ~]# openstack service list +----------------------------------+----------+----------+ | ID | Name | Type | +----------------------------------+----------+----------+ | e0109484377e4886b385fdf8e9467f79 | keystone | identity | +----------------------------------+----------+----------+ [root@controller ~]# openstack endpoint list +----------+----------+--------------+--------------+---------+-----------+-------------+ | ID | Region | Service Name | Service Type | Enabled | Interface | URL | +----------+----------+--------------+--------------+---------+-----------+-------------+ | 1316fa22 | RegionOn | keystone | identity | True | admin | http://cont | | cd1b402d | e | | | | | roller:3535 | | bb779580 | | | | | | 7/v3 | | 4878007f | | | | | | | | b622d05e | RegionOn | keystone | identity | True | public | http://cont | | 1cf14b9a | e | | | | | roller:5000 | | a46ce0b6 | | | | | | /v3 | | 7fc282d8 | | | | | | | | fb5705a8 | RegionOn | keystone | identity | True | internal | http://cont | | 143d4cc7 | e | | | | | roller:5000 | | a912c18d | | | | | | /v3 | | f7f499c6 | | | | | | | +----------+----------+--------------+--------------+---------+-----------+-------------+ #方法二：交互模式进行查看(优点是命令可以补齐) [root@controller ~]# openstack (openstack) service list +----------------------------------+----------+----------+ | ID | Name | Type | +----------------------------------+----------+----------+ | e0109484377e4886b385fdf8e9467f79 | keystone | identity | +----------------------------------+----------+----------+ (openstack) endpoint list +----------+----------+--------------+--------------+---------+-----------+-------------+ | ID | Region | Service Name | Service Type | Enabled | Interface | URL | +----------+----------+--------------+--------------+---------+-----------+-------------+ | 1316fa22 | RegionOn | keystone | identity | True | admin | http://cont | | cd1b402d | e | | | | | roller:3535 | | bb779580 | | | | | | 7/v3 | | 4878007f | | | | | | | | b622d05e | RegionOn | keystone | identity | True | public | http://cont | | 1cf14b9a | e | | | | | roller:5000 | | a46ce0b6 | | | | | | /v3 | | 7fc282d8 | | | | | | | | fb5705a8 | RegionOn | keystone | identity | True | internal | http://cont | | 143d4cc7 | e | | | | | roller:5000 | | a912c18d | | | | | | /v3 | | f7f499c6 | | | | | | | +----------+----------+--------------+--------------+---------+-----------+-------------+（1）创建域default：
[root@controller ~]# openstack domain create --description "Default Domain" default +-------------+----------------------------------+ | Field | Value | +-------------+----------------------------------+ | description | Default Domain | | enabled | True | | id | de961da844e84398821316b22d52d7c6 | | name | default | +-------------+----------------------------------+（2）在你的环境中，为进行管理操作，创建管理的项目、用户和角色：
【1】、创建 admin 项目：
[root@controller ~]# openstack project create --domain default \ > --description "Admin Project" admin +-------------+----------------------------------+ | Field | Value | +-------------+----------------------------------+ | description | Admin Project | | domain_id | de961da844e84398821316b22d52d7c6 | | enabled | True | | id | 0ab00c48d2b94493b654f33f2eb5a579 | | is_domain | False | | name | admin | | parent_id | de961da844e84398821316b22d52d7c6 | +-------------+----------------------------------+【2】、创建 admin 用户：
[root@controller ~]# openstack user create --domain default \> --password admin admin #指定admin用户的密码为admin。非交互式创建admin用户+-----------+----------------------------------+| Field | Value |+-----------+----------------------------------+| domain_id | de961da844e84398821316b22d52d7c6 || enabled | True || id | 74fbbef71f3a4c958b2006a8e0cdcb8c || name | admin |+-----------+----------------------------------+#也可以使用下面的命令来交互式创建admin用户openstack user create --domain default \ --password-prompt admin【3】、创建 admin 角色：
[root@controller ~]# openstack role create admin+-----------+----------------------------------+| Field | Value |+-----------+----------------------------------+| domain_id | None || id | 842b43ee3259494ab6f9ab467cd9d8dd || name | admin |+-----------+----------------------------------+【4】、添加admin 角色到 admin 项目和用户上：
[root@controller ~]# openstack role add --project admin --user admin admin（3）本指南使用一个你添加到你的环境中每个服务包含独有用户的service 项目。创建service项目：
[root@controller ~]# openstack project create --domain default \> --description "Service Project" service+-------------+----------------------------------+| Field | Value |+-------------+----------------------------------+| description | Service Project || domain_id | de961da844e84398821316b22d52d7c6 || enabled | True || id | dace50099735499a8cceb4fe8ffad750 || is_domain | False || name | service || parent_id | de961da844e84398821316b22d52d7c6 |+-------------+----------------------------------+（4）常规（非管理）任务应该使用无特权的项目和用户。作为例子，本指南创建 demo 项目和用户。
【1】、创建demo 项目：
[root@controller ~]# openstack project create --domain default \> --description "Demo Project" demo+-------------+----------------------------------+| Field | Value |+-------------+----------------------------------+| description | Demo Project || domain_id | de961da844e84398821316b22d52d7c6 || enabled | True || id | 4bf385a6bf92458194acf7a2faef794b || is_domain | False || name | demo || parent_id | de961da844e84398821316b22d52d7c6 |+-------------+----------------------------------+【2】、创建demo 用户：
[root@controller ~]# openstack user create --domain default \> --password demo demo #指定demo用户的密码为demo。非交互式创建glance用户+-----------+----------------------------------+| Field | Value |+-----------+----------------------------------+| domain_id | de961da844e84398821316b22d52d7c6 || enabled | True || id | c058d3e4f37940dc94ee618826e4ef6f || name | demo |+-----------+----------------------------------+#也可以使用下面的命令来交互式创建demo用户openstack user create --domain default \ --password-prompt demo【3】、创建 user 角色：
[root@controller ~]# openstack role create user +-----------+----------------------------------+ | Field | Value | +-----------+----------------------------------+ | domain_id | None | | id | ef665ff3bb02459d91fc7f634cd36ea1 | | name | user | +-----------+----------------------------------+【4】、添加 user角色到demo 项目和用户：
[root@controller ~]# openstack role add --project demo --user demo user查看域，项目，用户和角色是否创建成功
[root@controller ~]# openstack (openstack) domain list +----------------------------------+---------+---------+----------------+ | ID | Name | Enabled | Description | +----------------------------------+---------+---------+----------------+ | de961da844e84398821316b22d52d7c6 | default | True | Default Domain | +----------------------------------+---------+---------+----------------+ (openstack) project list +----------------------------------+---------+ | ID | Name | +----------------------------------+---------+ | 0ab00c48d2b94493b654f33f2eb5a579 | admin | | 4bf385a6bf92458194acf7a2faef794b | demo | | dace50099735499a8cceb4fe8ffad750 | service | +----------------------------------+---------+ (openstack) user list +----------------------------------+-------+ | ID | Name | +----------------------------------+-------+ | 74fbbef71f3a4c958b2006a8e0cdcb8c | admin | | c058d3e4f37940dc94ee618826e4ef6f | demo | +----------------------------------+-------+ (openstack) role list +----------------------------------+-------+ | ID | Name | +----------------------------------+-------+ | 842b43ee3259494ab6f9ab467cd9d8dd | admin | | ef665ff3bb02459d91fc7f634cd36ea1 | user | +----------------------------------+-------+（1）重置OS_TOKEN和OS_URL 环境变量：
[root@controller ~]# unset OS_TOKEN OS_URL（2）作为 admin 用户，请求认证令牌：
[root@controller ~]# unset OS_TOKEN OS_URL[root@controller ~]# openstack --os-auth-url http://controller:35357/v3 \> --os-project-domain-name default --os-user-domain-name default \> --os-project-name admin --os-username admin token issuePassword: #输入密码"admin"+------------+-----------------------------------------------------------------+| Field | Value |+------------+-----------------------------------------------------------------+| expires | 2019-04-18T13:28:27.564216Z || id | gAAAAABcuG1rVqz6FQcqYJBOBc4rRPb_1R3njUl6RDuQuWYcuUVj7s9m0Xu0SXH || | _Ka3fRG9WpnTTtHyGA9scEYwgCu8sP1RnpadCEy9z7lfmnxyMX80mPucIC6ArFh || | OqnxWyhgRk-UqsoNKDjrrT2_T0xQkLz8kKwTKk1Q5Hp6FltLc-u0oTGZ0 || project_id | 0ab00c48d2b94493b654f33f2eb5a579 || user_id | 74fbbef71f3a4c958b2006a8e0cdcb8c |+------------+----------------------------------------------------------------（3）作为demo 用户，请求认证令牌：
[root@controller ~]# openstack --os-auth-url http://controller:5000/v3 \> --os-project-domain-name default --os-user-domain-name default \> --os-project-name demo --os-username demo token issuePassword: +------------+-----------------------------------------------------------------+| Field | Value |+------------+-----------------------------------------------------------------+| expires | 2019-04-18T13:29:18.418594Z || id | gAAAAABcuG2evXvUcaogMeQ1CRzqa1uELVCSotxIIm520pElps-4NkoYAmUq31l || | dSa1Q5H0T_DYm7PtBooaHMykk80ehnjDFJrMZVF3VKGBK4yQpcT9aXEPnMMV9oP || | camyem-iPe7brpWR8SlHaebbZlf2dd1HVvwVBuFiDQruCmzYsyr0ahJIw || project_id | 4bf385a6bf92458194acf7a2faef794b || user_id | c058d3e4f37940dc94ee618826e4ef6f |+------------+-----------------------------------------------------------------+创建 admin 和 [](http://172.25.83.83/install-guide-rdo/keystone-openrc.html#id1)demo项目和用户创建客户端环境变量脚本。本指南的接下来的部分会引用这些脚本，为客户端操作加载合适的的凭证。
（1）编辑文件 admin-openrc 并添加如下内容：
[root@controller ~]# vim admin-openrcexport OS_PROJECT_DOMAIN_NAME=defaultexport OS_USER_DOMAIN_NAME=defaultexport OS_PROJECT_NAME=adminexport OS_USERNAME=adminexport OS_PASSWORD=adminexport OS_AUTH_URL=http://controller:35357/v3export OS_IDENTITY_API_VERSION=3export OS_IMAGE_API_VERSION=2（2）编辑文件 demo-openrc 并添加如下内容：
[root@controller ~]# vim demo-openrcexport OS_PROJECT_DOMAIN_NAME=defaultexport OS_USER_DOMAIN_NAME=defaultexport OS_PROJECT_NAME=demoexport OS_USERNAME=demoexport OS_PASSWORD=demoexport OS_AUTH_URL=http://controller:5000/v3export OS_IDENTITY_API_VERSION=3export OS_IMAGE_API_VERSION=2[root@controller ~]# source admin-openrc #执行admin-openrc脚本,获取admin用户的身份[root@controller ~]# openstack user list+----------------------------------+-------+| ID | Name |+----------------------------------+-------+| 74fbbef71f3a4c958b2006a8e0cdcb8c | admin || c058d3e4f37940dc94ee618826e4ef6f | demo |+----------------------------------+-------+[root@controller ~]# source demo-openrc #执行demo-openrc脚本,获取demo用户的身份[root@controller ~]# openstack user list #因为普通用户demo没有查看的权限,所以这里会报错You are not authorized to perform the requested action: identity:list_users (HTTP 403) (Request-ID: req-2afdae43-c77b-4a3f-b14e-6166ab054428)【1】、完成下面的步骤以创建数据库：
[root@controller ~]# mysql -u root -p #用数据库连接客户端以 root 用户连接到数据库服务器Enter password: #输入密码MariaDB [(none)]> CREATE DATABASE glance; #创建 glance 数据库Query OK, 1 row affected (0.00 sec) MariaDB [(none)]> GRANT ALL PRIVILEGES ON glance.* TO 'glance'@'localhost' \ -> IDENTIFIED BY 'glance'; #对``glance``数据库授予恰当的权限Query OK, 0 rows affected (0.00 sec) MariaDB [(none)]> GRANT ALL PRIVILEGES ON glance.* TO 'glance'@'%' IDENTIFIED BY 'glance'; #对``glance``数据库授予恰当的权限Query OK, 0 rows affected (0.01 sec) MariaDB [(none)]> ^DBye #退出数据库客户端。【2】、获得 admin 凭证来获取只有管理员能执行的命令的访问权限：
[root@controller ~]# source admin-openrc【3】、要创建服务证书，完成这些步骤：
创建 glance 用户：
[root@controller ~]# openstack user create --domain default --password glance glance #指定glance用户的密码为glance。非交互式创建glance用户+-----------+----------------------------------+| Field | Value |+-----------+----------------------------------+| domain_id | de961da844e84398821316b22d52d7c6 || enabled | True || id | c7fc73f73e9a49b0ac77d642b32e2997 || name | glance |+-----------+----------------------------------+#也可以使用下面的命令来交互式创建glance用户openstack user create --domain default --password-prompt glance添加 admin 角色到 glance 用户和 service 项目上。
[root@controller ~]# openstack role add --project service --user glance admin创建glance服务实体：
[root@controller ~]# openstack service create --name glance \> --description "OpenStack Image" image+-------------+----------------------------------+| Field | Value |+-------------+----------------------------------+| description | OpenStack Image || enabled | True || id | 2a6c4ed243d4476ca1085892657ec645 || name | glance || type | image |+-------------+----------------------------------+【4】、创建镜像服务的 API 端点：
[root@controller ~]# openstack endpoint create --region RegionOne \> image public http://controller:9292+--------------+----------------------------------+| Field | Value |+--------------+----------------------------------+| enabled | True || id | b32f2696e1c34a4395139f373a234792 || interface | public || region | RegionOne || region_id | RegionOne || service_id | 2a6c4ed243d4476ca1085892657ec645 || service_name | glance || service_type | image || url | http://controller:9292 |+--------------+----------------------------------+ [root@controller ~]# openstack endpoint create --region RegionOne \> image internal http://controller:9292+--------------+----------------------------------+| Field | Value |+--------------+----------------------------------+| enabled | True || id | 12401819a8e24539b3e6a878fda0530b || interface | internal || region | RegionOne || region_id | RegionOne || service_id | 2a6c4ed243d4476ca1085892657ec645 || service_name | glance || service_type | image || url | http://controller:9292 |+--------------+----------------------------------+ [root@controller ~]# openstack endpoint create --region RegionOne \> image admin http://controller:9292+--------------+----------------------------------+| Field | Value |+--------------+----------------------------------+| enabled | True || id | 7d0917aea7e3475aad3fa8deaeac28d0 || interface | admin || region | RegionOne || region_id | RegionOne || service_id | 2a6c4ed243d4476ca1085892657ec645 || service_name | glance || service_type | image || url | http://controller:9292 |+--------------+----------------------------------+查看用户，服务实体，API端点是否创建成功
[root@controller ~]# openstack(openstack) user list+----------------------------------+--------+| ID | Name |+----------------------------------+--------+| 74fbbef71f3a4c958b2006a8e0cdcb8c | admin || c058d3e4f37940dc94ee618826e4ef6f | demo || c7fc73f73e9a49b0ac77d642b32e2997 | glance |+----------------------------------+--------+(openstack) service list+----------------------------------+----------+----------+| ID | Name | Type |+----------------------------------+----------+----------+| 2a6c4ed243d4476ca1085892657ec645 | glance | image || e0109484377e4886b385fdf8e9467f79 | keystone | identity |+----------------------------------+----------+----------+(openstack) endpoint list+----------+----------+--------------+--------------+---------+-----------+-------------+| ID | Region | Service Name | Service Type | Enabled | Interface | URL |+----------+----------+--------------+--------------+---------+-----------+-------------+| 12401819 | RegionOn | glance | image | True | internal | http://cont || a8e24539 | e | | | | | roller:9292 || b3e6a878 | | | | | | || fda0530b | | | | | | || 1316fa22 | RegionOn | keystone | identity | True | admin | http://cont || cd1b402d | e | | | | | roller:3535 || bb779580 | | | | | | 7/v3 || 4878007f | | | | | | || 7d0917ae | RegionOn | glance | image | True | admin | http://cont || a7e3475a | e | | | | | roller:9292 || ad3fa8de | | | | | | || aeac28d0 | | | | | | || b32f2696 | RegionOn | glance | image | True | public | http://cont || e1c34a43 | e | | | | | roller:9292 || 95139f37 | | | | | | || 3a234792 | | | | | | || b622d05e | RegionOn | keystone | identity | True | public | http://cont || 1cf14b9a | e | | | | | roller:5000 || a46ce0b6 | | | | | | /v3 || 7fc282d8 | | | | | | || fb5705a8 | RegionOn | keystone | identity | True | internal | http://cont || 143d4cc7 | e | | | | | roller:5000 || a912c18d | | | | | | /v3 || f7f499c6 | | | | | | |+----------+----------+--------------+--------------+---------+-----------+-----【1】、安装软件包：
[root@controller ~]# yum install openstack-glance -y【2】、编辑文件 /etc/glance/glance-api.conf 并完成如下动作：
[root@controller ~]# vim /etc/glance/glance-api.conf在 [database] 部分，配置数据库访问：[database]connection = mysql+pymysql://glance:glance@controller/glance 在 [keystone_authtoken] 和 [paste_deploy] 部分，配置认证服务访问：[keystone_authtoken]auth_uri = http://controller:5000auth_url = http://controller:35357memcached_servers = controller:11211auth_type = passwordproject_domain_name = defaultuser_domain_name = defaultproject_name = serviceusername = glancepassword = glance [paste_deploy]flavor = keystone 在 [glance_store] 部分，配置本地文件系统存储和镜像文件位置：[glance_store]stores = file,httpdefault_store = filefilesystem_store_datadir = /var/lib/glance/images/【3】、编辑文件 [](http://172.25.83.83/install-guide-rdo/glance-install.html#id1)/etc/glance/glance-registry.conf并完成如下动作：
[root@controller ~]# vim /etc/glance/glance-registry.conf在 [database] 部分，配置数据库访问：[database]connection = mysql+pymysql://glance:glance@controller/glance 在 [keystone_authtoken] 和 [paste_deploy] 部分，配置认证服务访问：[keystone_authtoken]auth_uri = http://controller:5000auth_url = http://controller:35357memcached_servers = controller:11211auth_type = passwordproject_domain_name = defaultuser_domain_name = defaultproject_name = serviceusername = glancepassword = glance [paste_deploy]flavor = keystone【4】、写入镜像服务数据库，并登陆数据库查看是否写入成功
[root@controller ~]# su -s /bin/sh -c "glance-manage db_sync" glanceOption "verbose" from group "DEFAULT" is deprecated for removal. Its value may be silently ignored in the future./usr/lib/python2.7/site-packages/oslo_db/sqlalchemy/enginefacade.py:1056: OsloDBDeprecationWarning: EngineFacade is deprecated; please use oslo_db.sqlalchemy.enginefacade expire_on_commit=expire_on_commit, _conf=conf)/usr/lib/python2.7/site-packages/pymysql/cursors.py:166: Warning: (1831, u'Duplicate index `ix_image_properties_image_id_name`. This is deprecated and will be disallowed in a future release.') result = self._query(query) #忽略输出中任何不推荐使用的信息。 [root@controller ~]# mysql -uroot -pEnter password: #输入密码MariaDB [(none)]> use glance;MariaDB [glance]> show tables;+----------------------------------+| Tables_in_glance |+----------------------------------+| artifact_blob_locations || artifact_blobs || artifact_dependencies || artifact_properties || artifact_tags || artifacts || image_locations || image_members || image_properties || image_tags || images || metadef_namespace_resource_types || metadef_namespaces || metadef_objects || metadef_properties || metadef_resource_types || metadef_tags || migrate_version || task_info || tasks |+----------------------------------+20 rows in set (0.00 sec) MariaDB [glance]> ^DBye #按"Ctrl+d"退出数据库客户端【1】、启动镜像服务、配置他们随机启动：
[root@controller ~]# systemctl enable openstack-glance-api.service \> openstack-glance-registry.service[root@controller ~]# systemctl start openstack-glance-api.service \> openstack-glance-registry.service（1）下载源镜像：
[root@controller ~]# lsadmin-openrc cirros-0.3.5-x86_64-disk.img demo-openrc（2）使用 QCOW2 磁盘格式， bare 容器格式上传镜像到镜像服务并设置公共可见，这样所有的项目都可以访问它：
[root@controller ~]# openstack image create "cirros" --file cirros-0.3.5-x86_64-disk.img --disk-format qcow2 --container-format bare --public +------------------+------------------------------------------------------+ | Field | Value | +------------------+------------------------------------------------------+ | checksum | f8ab98ff5e73ebab884d80c9dc9c7290 | | container_format | bare | | created_at | 2019-04-18T13:13:55Z | | disk_format | qcow2 | | file | /v2/images/fe68d600-2b20-45de-8391-2d3eecdaca4e/file | | id | fe68d600-2b20-45de-8391-2d3eecdaca4e | | min_disk | 0 | | min_ram | 0 | | name | cirros | | owner | 0ab00c48d2b94493b654f33f2eb5a579 | | protected | False | | schema | /v2/schemas/image | | size | 13267968 | | status | active | | tags | | | updated_at | 2019-04-18T13:13:55Z | | virtual_size | None | | visibility | public | +------------------+------------------------------------------------------+（3）确认镜像的上传并验证属性：
[root@controller ~]# openstack image list #状态是active表示成功 +--------------------------------------+--------+--------+ | ID | Name | Status | +--------------------------------------+--------+--------+ | fe68d600-2b20-45de-8391-2d3eecdaca4e | cirros | active | +--------------------------------------+--------+--------+【1】、为了创建数据库，必须完成这些步骤：
[root@controller ~]# mysql -uroot -p #用数据库连接客户端以 root 用户连接到数据库服务器 Enter password: #输入密码 MariaDB [(none)]> CREATE DATABASE nova_api; #创建 nova_api 数据库 Query OK, 1 row affected (0.00 sec) MariaDB [(none)]> CREATE DATABASE nova; #创建 nova 数据库： Query OK, 1 row affected (0.00 sec) MariaDB [(none)]> GRANT ALL PRIVILEGES ON nova_api.* TO 'nova'@'localhost' \ -> IDENTIFIED BY 'nova'; #对数据库进行正确的授权： Query OK, 0 rows affected (0.00 sec) MariaDB [(none)]> GRANT ALL PRIVILEGES ON nova_api.* TO 'nova'@'%' IDENTIFIED BY 'nova'; #对数据库进行正确的授权： Query OK, 0 rows affected (0.00 sec) MariaDB [(none)]> GRANT ALL PRIVILEGES ON nova.* TO 'nova'@'localhost' \ -> IDENTIFIED BY 'nova'; #对数据库进行正确的授权： Query OK, 0 rows affected (0.00 sec) MariaDB [(none)]> GRANT ALL PRIVILEGES ON nova.* TO 'nova'@'%' IDENTIFIED BY 'nova'; #对数据库进行正确的授权： Query OK, 0 rows affected (0.00 sec) MariaDB [(none)]> ^DBye #退出数据库客户端。【2】、获得 admin 凭证来获取只有管理员能执行的命令的访问权限：
[root@controller ~]# source admin-openrc【3】、要创建服务证书，完成这些步骤：
创建 nova 用户：
[root@controller ~]# openstack user create --domain default \ #指定nova用户的密码为nova。非交互式创建nova用户 > --password nova nova +-----------+----------------------------------+ | Field | Value | +-----------+----------------------------------+ | domain_id | de961da844e84398821316b22d52d7c6 | | enabled | True | | id | 21cc7d5766c241bf8de6e2dd2c1fa4e1 | | name | nova | +-----------+----------------------------------+ #也可以使用下面的命令来交互式创建glance用户 openstack user create --domain default \ --password-prompt nova给 nova 用户添加 admin 角色：
[root@controller ~]# openstack role add --project service --user nova admin创建 nova 服务实体：
[root@controller ~]# openstack service create --name nova \> --description "OpenStack Compute" compute+-------------+----------------------------------+| Field | Value |+-------------+----------------------------------+| description | OpenStack Compute || enabled | True || id | 9011c0f89bed4f8184661b22dfe60729 || name | nova || type | compute |+-------------+----------------------------------+【4】、创建 Compute 服务 API 端点 ：
[root@controller ~]# openstack endpoint create --region RegionOne \ > compute public http://controller:8774/v2.1/%\(tenant_id\)s +--------------+-------------------------------------------+ | Field | Value | +--------------+-------------------------------------------+ | enabled | True | | id | 50063bd98af24f1c82bdfb75d78c0dde | | interface | public | | region | RegionOne | | region_id | RegionOne | | service_id | 9011c0f89bed4f8184661b22dfe60729 | | service_name | nova | | service_type | compute | | url | http://controller:8774/v2.1/%(tenant_id)s | +--------------+-------------------------------------------+ [root@controller ~]# openstack endpoint create --region RegionOne \ > compute internal http://controller:8774/v2.1/%\(tenant_id\)s +--------------+-------------------------------------------+ | Field | Value | +--------------+-------------------------------------------+ | enabled | True | | id | bced68ae5cc141c69ed0e18de09fc708 | | interface | internal | | region | RegionOne | | region_id | RegionOne | | service_id | 9011c0f89bed4f8184661b22dfe60729 | | service_name | nova | | service_type | compute | | url | http://controller:8774/v2.1/%(tenant_id)s | +--------------+-------------------------------------------+ [root@controller ~]# openstack endpoint create --region RegionOne \ > compute admin http://controller:8774/v2.1/%\(tenant_id\)s +--------------+-------------------------------------------+ | Field | Value | +--------------+-------------------------------------------+ | enabled | True | | id | 2a3bcdde1ea040219e667a6b0ffd7d54 | | interface | admin | | region | RegionOne | | region_id | RegionOne | | service_id | 9011c0f89bed4f8184661b22dfe60729 | | service_name | nova | | service_type | compute | | url | http://controller:8774/v2.1/%(tenant_id)s | +--------------+-------------------------------------------+查看用户，服务实体，API端点是否创建成功
[root@controller ~]# openstack (openstack) user list +----------------------------------+--------+ | ID | Name | +----------------------------------+--------+ | 21cc7d5766c241bf8de6e2dd2c1fa4e1 | nova | | 74fbbef71f3a4c958b2006a8e0cdcb8c | admin | | c058d3e4f37940dc94ee618826e4ef6f | demo | | c7fc73f73e9a49b0ac77d642b32e2997 | glance | +----------------------------------+--------+ (openstack) service list +----------------------------------+----------+----------+ | ID | Name | Type | +----------------------------------+----------+----------+ | 2a6c4ed243d4476ca1085892657ec645 | glance | image | | 9011c0f89bed4f8184661b22dfe60729 | nova | compute | | e0109484377e4886b385fdf8e9467f79 | keystone | identity | +----------------------------------+----------+----------+ (openstack) endpoint list +----------+----------+--------------+--------------+---------+-----------+-------------+ | ID | Region | Service Name | Service Type | Enabled | Interface | URL | +----------+----------+--------------+--------------+---------+-----------+-------------+ | 12401819 | RegionOn | glance | image | True | internal | http://cont | | a8e24539 | e | | | | | roller:9292 | | b3e6a878 | | | | | | | | fda0530b | | | | | | | | 1316fa22 | RegionOn | keystone | identity | True | admin | http://cont | | cd1b402d | e | | | | | roller:3535 | | bb779580 | | | | | | 7/v3 | | 4878007f | | | | | | | | 2a3bcdde | RegionOn | nova | compute | True | admin | http://cont | | 1ea04021 | e | | | | | roller:8774 | | 9e667a6b | | | | | | /v2.1/%(ten | | 0ffd7d54 | | | | | | ant_id)s | | 50063bd9 | RegionOn | nova | compute | True | public | http://cont | | 8af24f1c | e | | | | | roller:8774 | | 82bdfb75 | | | | | | /v2.1/%(ten | | d78c0dde | | | | | | ant_id)s | | 7d0917ae | RegionOn | glance | image | True | admin | http://cont | | a7e3475a | e | | | | | roller:9292 | | ad3fa8de | | | | | | | | aeac28d0 | | | | | | | | b32f2696 | RegionOn | glance | image | True | public | http://cont | | e1c34a43 | e | | | | | roller:9292 | | 95139f37 | | | | | | | | 3a234792 | | | | | | | | b622d05e | RegionOn | keystone | identity | True | public | http://cont | | 1cf14b9a | e | | | | | roller:5000 | | a46ce0b6 | | | | | | /v3 | | 7fc282d8 | | | | | | | | bced68ae | RegionOn | nova | compute | True | internal | http://cont | | 5cc141c6 | e | | | | | roller:8774 | | 9ed0e18d | | | | | | /v2.1/%(ten | | e09fc708 | | | | | | ant_id)s | | fb5705a8 | RegionOn | keystone | identity | True | internal | http://cont | | 143d4cc7 | e | | | | | roller:5000 | | a912c18d | | | | | | /v3 | | f7f499c6 | | | | | | | +----------+----------+--------------+--------------+---------+-----------+-------------+【1】、安装软件包：
[root@controller ~]# yum install openstack-nova-api openstack-nova-conductor openstack-nova-console openstack-nova-novncproxy openstack-nova-scheduler -y【2】、编辑/etc/nova/nova.conf文件并完成下面的操作：
[root@controller ~]# vim /etc/nova/nova.conf 在``[DEFAULT]``部分，只启用计算和元数据API： [DEFAULT] enabled_apis = osapi_compute,metadata 在``[api_database]``和``[database]``部分，配置数据库的连接： [api_database] connection = mysql+pymysql://nova:nova@controller/nova_api [database] connection = mysql+pymysql://nova:nova@controller/nova 在 “[DEFAULT]” 和 “[oslo_messaging_rabbit]”部分，配置 “RabbitMQ” 消息队列访问： [DEFAULT] ... rpc_backend = rabbit [oslo_messaging_rabbit] rabbit_host = controller rabbit_userid = openstack rabbit_password = openstack 在 “[DEFAULT]” 和 “[keystone_authtoken]” 部分，配置认证服务访问： [DEFAULT] ... auth_strategy = keystone [keystone_authtoken] auth_uri = http://controller:5000 auth_url = http://controller:35357 memcached_servers = controller:11211 auth_type = password project_domain_name = default user_domain_name = default project_name = service username = nova password = nova 在 [DEFAULT 部分，配置``my_ip`` 来使用控制节点的管理接口的IP 地址。 [DEFAULT] ... my_ip = 172.25.83.1 在 [DEFAULT] 部分，使能 Networking 服务： [DEFAULT] ... firewall_driver = nova.virt.firewall.NoopFirewallDriver 在``[vnc]``部分，配置VNC代理使用控制节点的管理接口IP地址 ： [vnc] vncserver_listen = $my_ip vncserver_proxyclient_address = $my_ip 在 [glance] 区域，配置镜像服务 API 的位置： [glance] api_servers = http://controller:9292 在 [oslo_concurrency] 部分，配置锁路径： [oslo_concurrency] lock_path = /var/lib/nova/tmp【3】、同步Compute 数据库，并登陆数据库查看是否同步成功
[root@controller ~]# su -s /bin/sh -c "nova-manage api_db sync" nova [root@controller ~]# su -s /bin/sh -c "nova-manage db sync" nova /usr/lib/python2.7/site-packages/pymysql/cursors.py:166: Warning: (1831, u'Duplicate index `block_device_mapping_instance_uuid_virtual_name_device_name_idx`. This is deprecated and will be disallowed in a future release.') result = self._query(query) /usr/lib/python2.7/site-packages/pymysql/cursors.py:166: Warning: (1831, u'Duplicate index `uniq_instances0uuid`. This is deprecated and will be disallowed in a future release.') result = self._query(query) [root@controller ~]# mysql -uroot -p Enter password: MariaDB [(none)]> use nova; MariaDB [nova]> show tables; +--------------------------------------------+ | Tables_in_nova | +--------------------------------------------+ | agent_builds | | aggregate_hosts | | aggregate_metadata | | aggregates | | allocations | | block_device_mapping | | bw_usage_cache | | cells | | certificates | | compute_nodes | | console_pools | | consoles | | dns_domains | | fixed_ips | | floating_ips | | instance_actions | | instance_actions_events | | instance_extra | | instance_faults | | instance_group_member | | instance_group_policy | | instance_groups | | instance_id_mappings | | instance_info_caches | | instance_metadata | | instance_system_metadata | | instance_type_extra_specs | | instance_type_projects | | instance_types | | instances | | inventories | | key_pairs | | migrate_version | | migrations | | networks | | pci_devices | | project_user_quotas | | provider_fw_rules | | quota_classes | | quota_usages | | quotas | | reservations | | resource_provider_aggregates | | resource_providers | | s3_images | | security_group_default_rules | | security_group_instance_association | | security_group_rules | | security_groups | | services | | shadow_agent_builds | | shadow_aggregate_hosts | | shadow_aggregate_metadata | | shadow_aggregates | | shadow_block_device_mapping | | shadow_bw_usage_cache | | shadow_cells | | shadow_certificates | | shadow_compute_nodes | | shadow_console_pools | | shadow_consoles | | shadow_dns_domains | | shadow_fixed_ips | | shadow_floating_ips | | shadow_instance_actions | | shadow_instance_actions_events | | shadow_instance_extra | | shadow_instance_faults | | shadow_instance_group_member | | shadow_instance_group_policy | | shadow_instance_groups | | shadow_instance_id_mappings | | shadow_instance_info_caches | | shadow_instance_metadata | | shadow_instance_system_metadata | | shadow_instance_type_extra_specs | | shadow_instance_type_projects | | shadow_instance_types | | shadow_instances | | shadow_key_pairs | | shadow_migrate_version | | shadow_migrations | | shadow_networks | | shadow_pci_devices | | shadow_project_user_quotas | | shadow_provider_fw_rules | | shadow_quota_classes | | shadow_quota_usages | | shadow_quotas | | shadow_reservations | | shadow_s3_images | | shadow_security_group_default_rules | | shadow_security_group_instance_association | | shadow_security_group_rules | | shadow_security_groups | | shadow_services | | shadow_snapshot_id_mappings | | shadow_snapshots | | shadow_task_log | | shadow_virtual_interfaces | | shadow_volume_id_mappings | | shadow_volume_usage_cache | | snapshot_id_mappings | | snapshots | | tags | | task_log | | virtual_interfaces | | volume_id_mappings | | volume_usage_cache | +--------------------------------------------+ 109 rows in set (0.00 sec) MariaDB [nova]> ^DBye #按"Ctrl+d退出数据库客户端" [root@controller ~]# mysql -unova -pnova nova MariaDB [nova]> ^DBye [root@controller ~]# mysql -unova -pnova nova_api MariaDB [nova_api]> ^DBye [root@controller ~]# systemctl enable openstack-nova-api.service \ > openstack-nova-consoleauth.service openstack-nova-scheduler.service \ > openstack-nova-conductor.service openstack-nova-novncproxy.service [root@controller ~]# systemctl start openstack-nova-api.service \ > openstack-nova-consoleauth.service openstack-nova-scheduler.service \ > openstack-nova-conductor.service openstack-nova-novncproxy.service查看关于compute服务的相关服务，是否已经开启
[root@controller ~]# openstack (openstack) compute service list +----+--------------+------------+----------+---------+-------+--------------+ | Id | Binary | Host | Zone | Status | State | Updated At | +----+--------------+------------+----------+---------+-------+--------------+ | 1 | nova- | controller | internal | enabled | up | 2019-04-19T0 | | | conductor | | | | | 2:34:49.0000 | | | | | | | | 00 | | 2 | nova- | controller | internal | enabled | up | 2019-04-19T0 | | | consoleauth | | | | | 2:34:49.0000 | | | | | | | | 00 | | 3 | nova- | controller | internal | enabled | up | 2019-04-19T0 | | | scheduler | | | | | 2:34:49.0000 | | | | | | | | 00 | +----+--------------+------------+----------+---------+-------+--------------+【1】、添加一块网卡：
[root@server2 ~]# ip a 1: lo:mtu 65536 qdisc noqueue state UNKNOWN qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0:mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 52:54:00:74:37:cd brd ff:ff:ff:ff:ff:ff inet 172.25.83.2/24 brd 172.25.83.255 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe74:37cd/64 scope link valid_lft forever preferred_lft forever 3: eth2:mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 52:54:00:bf:b4:09 brd ff:ff:ff:ff:ff:ff【2】、将第一个接口配置为管理网络接口：
[root@server2 ~]# cd /etc/sysconfig/network-scripts/[root@server2 network-scripts]# vim ifcfg-eth0 BOOTPROTO=noneNAME=eth0DEVICE=eth0ONBOOT=yesIPADDR=172.25.83.2NETMASK=255.255.255.0GATEWAY=172.25.83.83DNS1=114.114.114.114【3】、提供者网络接口使用一个特殊的配置，不分配给它IP地址。并进行激活
[root@server2 network-scripts]# cp ifcfg-eth0 ifcfg-eth2 [root@server2 network-scripts]# vim ifcfg-eth2 1 BOOTPROTO=none 2 DEVICE=eth2 3 ONBOOT=yes [root@server2 network-scripts]# ifup eth2 #激活eth2网卡 [root@server2 network-scripts]# ip addr show eth2 3: eth2:mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 52:54:00:bf:b4:09 brd ff:ff:ff:ff:ff:ff inet6 fe80::5054:ff:febf:b409/64 scope link valid_lft forever preferred_lft forever【1】、设置节点主机名为compute1。
[root@server2 ~]# hostnamectl set-hostname compute1 [root@server2 ~]# logout Connection to 172.25.83.2 closed. [student@foundation83 ~]$ ssh root@172.25.83.2 root@172.25.83.2's password: Last login: Fri Apr 19 10:30:55 2019 from foundation83.ilt.example.com [root@compute1 ~]# hostname compute1【2】、编辑 /etc/hosts 文件包含以下内容：
[root@compute1 ~]# vim /etc/hosts 172.25.83.1 controller 172.25.83.2 compute1 172.25.83.3 block1【1】、安装软件包：
[root@compute1 ~]# yum install chrony -y【2】、编辑/etc/chrony.conf 文件：
[root@compute1 ~]# vim /etc/chrony.conf #删除第4行,第5行,第6行;并将第3行改为如下的内容 3 server 172.25.83.83 iburst【3】、启动chronyd服务并将其配置为随系统启动：
[root@compute1 ~]# systemctl restart chronyd.service [root@compute1 ~]# chronyc sources -v 210 Number of sources = 1 .-- Source mode '^' = server, '=' = peer, '#' = local clock. / .- Source state '*' = current synced, '+' = combined , '-' = not combined, | / '?' = unreachable, 'x' = time may be in error, '~' = time too variable. || .- xxxx [ yyyy ] +/- zzzz || Reachability register (octal) -. | xxxx = adjusted offset, || Log2(Polling interval) --. | | yyyy = measured offset, || \ | | zzzz = estimated error. || | | \ MS Name/IP address Stratum Poll Reach LastRx Last sample =============================================================================== ^* foundation83.ilt.example. 3 6 17 3 +665ns[+1610us] +/- 79ms [root@compute1 ~]# systemctl enable chronyd.service [root@compute1 ~]# systemctl is-enabled chronyd.service enabled在进行配置之前，先配置yum源
[root@compute1 ~]# scp 172.25.83.1:/etc/yum.repos.d/openstack.repo /etc/yum.repos.d/ root@172.25.83.1's password: openstack.repo 100% 70 0.1KB/s 00:00 [root@compute1 ~]# ll -d /etc/yum.repos.d/ drwxr-xr-x. 2 root root 63 Apr 19 11:13 /etc/yum.repos.d/ [root@compute1 ~]# yum clean all [root@compute1 ~]# yum repolist repo id repo name status dvd rhel7.3 4,751 openstack mitaka 279 repolist: 5,030【1】、安装软件包：
[root@compute1 ~]# yum upgrade -y #升级软件包 [root@compute1 ~]# yum install openstack-nova-compute -y【2】、编辑/etc/nova/nova.conf文件并完成下面的操作：
[root@compute1 ~]# vim /etc/nova/nova.conf 在``[DEFAULT]`` 和 [oslo_messaging_rabbit]部分，配置``RabbitMQ``消息队列的连接： [DEFAULT] rpc_backend = rabbit [oslo_messaging_rabbit] rabbit_host = controller rabbit_userid = openstack rabbit_password = openstack 在 “[DEFAULT]” 和 “[keystone_authtoken]” 部分，配置认证服务访问： [DEFAULT] ... auth_strategy = keystone [keystone_authtoken] auth_uri = http://controller:5000 auth_url = http://controller:35357 memcached_servers = controller:11211 auth_type = password project_domain_name = default user_domain_name = default project_name = service username = nova password = nova 在 [DEFAULT] 部分，配置 my_ip 选项： [DEFAULT] ... my_ip = 172.25.83.2 在 [DEFAULT] 部分，使能 Networking 服务： [DEFAULT] ... use_neutron = True firewall_driver = nova.virt.firewall.NoopFirewallDriver 在``[vnc]``部分，启用并配置远程控制台访问： [vnc] enabled = True vncserver_listen = 0.0.0.0 vncserver_proxyclient_address = $my_ip novncproxy_base_url = http://controller:6080/vnc_auto.html 在 [glance] 区域，配置镜像服务 API 的位置： [glance] api_servers = http://controller:9292 在 [oslo_concurrency] 部分，配置锁路径： [oslo_concurrency] lock_path = /var/lib/nova/tmp【1】、确定您的计算节点是否支持虚拟机的硬件加速。
[root@compute1 ~]# egrep -c '(vmx|svm)' /proc/cpuinfo0如果这个命令返回了 one or greater 的值，那么你的计算节点支持硬件加速且不需要额外的配置。
如果这个命令返回了 zero 值，那么你的计算节点不支持硬件加速。你必须配置 libvirt 来使用 QEMU 去代替 KVM
在 /etc/nova/nova.conf 文件的 [libvirt] 区域做出如下的编辑：
[libvirt]virt_type = qemu【2】、启动计算服务及其依赖，并将其配置为随系统自动启动：
[root@compute1 ~]# systemctl enable libvirtd.service openstack-nova-compute.service[root@compute1 ~]# systemctl start libvirtd.service openstack-nova-compute.service在控制节点：茶卡关于compute服务的相关服务，是否已经开启（多开启了一个nova-compute服务）
[root@controller ~]# openstack(openstack) compute service list+----+--------------+------------+----------+---------+-------+--------------+| Id | Binary | Host | Zone | Status | State | Updated At |+----+--------------+------------+----------+---------+-------+--------------+| 1 | nova- | controller | internal | enabled | up | 2019-04-19T0 || | conductor | | | | | 3:28:20.0000 || | | | | | | 00 || 2 | nova- | controller | internal | enabled | up | 2019-04-19T0 || | consoleauth | | | | | 3:28:20.0000 || | | | | | | 00 || 3 | nova- | controller | internal | enabled | up | 2019-04-19T0 || | scheduler | | | | | 3:28:20.0000 || | | | | | | 00 || 6 | nova-compute | compute1 | nova | enabled | up | 2019-04-19T0 || | | | | | | 3:28:21.0000 || | | | | | | 00 |+----+--------------+------------+----------+---------+-------+--------------+【1】、完成下面的步骤以创建数据库：
[root@controller ~]# mysql -u root -p #用数据库连接客户端以 root 用户连接到数据库服务器Enter password: #输入密码MariaDB [(none)]> CREATE DATABASE neutron; #创建``neutron`` 数据库Query OK, 1 row affected (0.00 sec) MariaDB [(none)]> GRANT ALL PRIVILEGES ON neutron.* TO 'neutron'@'localhost' \ -> IDENTIFIED BY 'neutron'; #对``neutron`` 数据库授予合适的访问权限Query OK, 0 rows affected (0.00 sec) MariaDB [(none)]> GRANT ALL PRIVILEGES ON neutron.* TO 'neutron'@'%' IDENTIFIED BY 'neutron'; #对``neutron`` 数据库授予合适的访问权限Query OK, 0 rows affected (0.00 sec) MariaDB [(none)]> ^DBye #按"Ctrl+d"退出数据库客户端。【2】、获得 admin 凭证来获取只有管理员能执行的命令的访问权限：
[root@controller ~]# source admin-openrc【3】、要创建服务证书，完成这些步骤：
创建neutron用户：
[root@controller ~]# openstack user create --domain default --password neutron neutron #指定neutron用户的密码为neutron。非交互式创建neutron用户+-----------+----------------------------------+| Field | Value |+-----------+----------------------------------+| domain_id | de961da844e84398821316b22d52d7c6 || enabled | True || id | a688eb041a064399a7c4fe238841ea07 || name | neutron |+-----------+----------------------------------+#也可以使用下面的命令来交互式创建neutron用户openstack user create --domain default --password-prompt neutron添加admin 角色到neutron 用户：
[root@controller ~]# openstack role add --project service --user neutron admin创建neutron服务实体：
[root@controller ~]# openstack service create --name neutron \ > --description "OpenStack Networking" network +-------------+----------------------------------+ | Field | Value | +-------------+----------------------------------+ | description | OpenStack Networking | | enabled | True | | id | 79b2641148f347228ba96c3900c292c6 | | name | neutron | | type | network | +-------------+----------------------------------+【4】、创建网络服务API端点：
[root@controller ~]# openstack endpoint create --region RegionOne \ > network public http://controller:9696 +--------------+----------------------------------+ | Field | Value | +--------------+----------------------------------+ | enabled | True | | id | 44f0e573c738438fbf97fe97a50163b7 | | interface | public | | region | RegionOne | | region_id | RegionOne | | service_id | 79b2641148f347228ba96c3900c292c6 | | service_name | neutron | | service_type | network | | url | http://controller:9696 | +--------------+----------------------------------+ [root@controller ~]# openstack endpoint create --region RegionOne \ > network internal http://controller:9696 +--------------+----------------------------------+ | Field | Value | +--------------+----------------------------------+ | enabled | True | | id | 9850f10060584221ab91381e4224b3d7 | | interface | internal | | region | RegionOne | | region_id | RegionOne | | service_id | 79b2641148f347228ba96c3900c292c6 | | service_name | neutron | | service_type | network | | url | http://controller:9696 | +--------------+----------------------------------+ [root@controller ~]# openstack endpoint create --region RegionOne \ > network admin http://controller:9696 +--------------+----------------------------------+ | Field | Value | +--------------+----------------------------------+ | enabled | True | | id | fab7e826606945f085e11765ecf7b75f | | interface | admin | | region | RegionOne | | region_id | RegionOne | | service_id | 79b2641148f347228ba96c3900c292c6 | | service_name | neutron | | service_type | network | | url | http://controller:9696 | +--------------+----------------------------------+查看用户，服务实体，API端点是否创建成功
[root@controller ~]# openstack (openstack) user list +----------------------------------+---------+ | ID | Name | +----------------------------------+---------+ | 21cc7d5766c241bf8de6e2dd2c1fa4e1 | nova | | 74fbbef71f3a4c958b2006a8e0cdcb8c | admin | | a688eb041a064399a7c4fe238841ea07 | neutron | | c058d3e4f37940dc94ee618826e4ef6f | demo | | c7fc73f73e9a49b0ac77d642b32e2997 | glance | +----------------------------------+---------+ (openstack) service list +----------------------------------+----------+----------+ | ID | Name | Type | +----------------------------------+----------+----------+ | 2a6c4ed243d4476ca1085892657ec645 | glance | image | | 79b2641148f347228ba96c3900c292c6 | neutron | network | | 9011c0f89bed4f8184661b22dfe60729 | nova | compute | | e0109484377e4886b385fdf8e9467f79 | keystone | identity | +----------------------------------+----------+----------+ (openstack) endpoint list +----------+----------+--------------+--------------+---------+-----------+-------------+ | ID | Region | Service Name | Service Type | Enabled | Interface | URL | +----------+----------+--------------+--------------+---------+-----------+-------------+ | 12401819 | RegionOn | glance | image | True | internal | http://cont | | a8e24539 | e | | | | | roller:9292 | | b3e6a878 | | | | | | | | fda0530b | | | | | | | | 1316fa22 | RegionOn | keystone | identity | True | admin | http://cont | | cd1b402d | e | | | | | roller:3535 | | bb779580 | | | | | | 7/v3 | | 4878007f | | | | | | | | 2a3bcdde | RegionOn | nova | compute | True | admin | http://cont | | 1ea04021 | e | | | | | roller:8774 | | 9e667a6b | | | | | | /v2.1/%(ten | | 0ffd7d54 | | | | | | ant_id)s | | 44f0e573 | RegionOn | neutron | network | True | public | http://cont | | c738438f | e | | | | | roller:9696 | | bf97fe97 | | | | | | | | a50163b7 | | | | | | | | 50063bd9 | RegionOn | nova | compute | True | public | http://cont | | 8af24f1c | e | | | | | roller:8774 | | 82bdfb75 | | | | | | /v2.1/%(ten | | d78c0dde | | | | | | ant_id)s | | 7d0917ae | RegionOn | glance | image | True | admin | http://cont | | a7e3475a | e | | | | | roller:9292 | | ad3fa8de | | | | | | | | aeac28d0 | | | | | | | | 9850f100 | RegionOn | neutron | network | True | internal | http://cont | | 60584221 | e | | | | | roller:9696 | | ab91381e | | | | | | | | 4224b3d7 | | | | | | | | b32f2696 | RegionOn | glance | image | True | public | http://cont | | e1c34a43 | e | | | | | roller:9292 | | 95139f37 | | | | | | | | 3a234792 | | | | | | | | b622d05e | RegionOn | keystone | identity | True | public | http://cont | | 1cf14b9a | e | | | | | roller:5000 | | a46ce0b6 | | | | | | /v3 | | 7fc282d8 | | | | | | | | bced68ae | RegionOn | nova | compute | True | internal | http://cont | | 5cc141c6 | e | | | | | roller:8774 | | 9ed0e18d | | | | | | /v2.1/%(ten | | e09fc708 | | | | | | ant_id)s | | fab7e826 | RegionOn | neutron | network | True | admin | http://cont | | 606945f0 | e | | | | | roller:9696 | | 85e11765 | | | | | | | | ecf7b75f | | | | | | | | fb5705a8 | RegionOn | keystone | identity | True | internal | http://cont | | 143d4cc7 | e | | | | | roller:5000 | | a912c18d | | | | | | /v3 | | f7f499c6 | | | | | | | +----------+----------+--------------+--------------+---------+-----------+-------------+【1】、安装组件
[root@controller ~]# yum install openstack-neutron openstack-neutron-ml2 \ > openstack-neutron-linuxbridge ebtables -y【2】、配置服务组件
编辑/etc/neutron/neutron.conf 文件并完成如下操作：
[root@controller ~]# vim /etc/neutron/neutron.conf 在 [database] 部分，配置数据库访问： [database] connection = mysql+pymysql://neutron:neutron@controller/neutron 在``[DEFAULT]``部分，启用ML2插件并禁用其他插件： [DEFAULT] core_plugin = ml2 service_plugins = 在 “[DEFAULT]” 和 “[oslo_messaging_rabbit]”部分，配置 “RabbitMQ” 消息队列的连接： [DEFAULT] ... rpc_backend = rabbit [oslo_messaging_rabbit] rabbit_host = controller rabbit_userid = openstack rabbit_password = openstack 在 “[DEFAULT]” 和 “[keystone_authtoken]” 部分，配置认证服务访问： [DEFAULT] ... auth_strategy = keystone [keystone_authtoken] auth_uri = http://controller:5000 auth_url = http://controller:35357 memcached_servers = controller:11211 auth_type = password project_domain_name = default user_domain_name = default project_name = service username = neutron password = neutron 在``[DEFAULT]``和``[nova]``部分，配置网络服务来通知计算节点的网络拓扑变化： [DEFAULT] ... notify_nova_on_port_status_changes = True notify_nova_on_port_data_changes = True [nova] auth_url = http://controller:35357 auth_type = password project_domain_name = default user_domain_name = default region_name = RegionOne project_name = service username = nova password = nova 在 [oslo_concurrency] 部分，配置锁路径： [oslo_concurrency] lock_path = /var/lib/neutron/tmp【3】、配置 Modular Layer 2 (ML2) 插件
编辑/etc/neutron/plugins/ml2/ml2_conf.ini文件并完成以下操作：
[root@controller ~]# vim /etc/neutron/plugins/ml2/ml2_conf.ini 在``[ml2]``部分，启用flat和VLAN网络： [ml2] type_drivers = flat,vlan 在``[ml2]``部分，禁用私有网络： [ml2] ... tenant_network_types = 在``[ml2]``部分，启用Linuxbridge机制： [ml2] ... mechanism_drivers = linuxbridge 在``[ml2]`` 部分，启用端口安全扩展驱动： [ml2] ... extension_drivers = port_security 在``[ml2_type_flat]``部分，配置公共虚拟网络为flat网络 [ml2] extension_drivers = port_security 在 ``[securitygroup]``部分，启用 ipset 增加安全组规则的高效性： [securitygroup] enable_ipset = True【4】、配置Linuxbridge代理
编辑/etc/neutron/plugins/ml2/linuxbridge_agent.ini文件并且完成以下操作：
[root@controller ~]# vim /etc/neutron/plugins/ml2/linuxbridge_agent.in在``[linux_bridge]``部分，将公共虚拟网络和公共物理网络接口对应起来：[linux_bridge]physical_interface_mappings = provider:eth2 在``[vxlan]``部分，禁止VXLAN覆盖网络：[vxlan]enable_vxlan = False 在 ``[securitygroup]``部分，启用安全组并配置 Linuxbridge iptables firewall driver:enable_security_group = Truefirewall_driver = neutron.agent.linux.iptables_firewall.IptablesFirewallDriver【5】、配置DHCP代理
编辑/etc/neutron/dhcp_agent.ini文件并完成下面的操作：
[root@controller ~]# vim /etc/neutron/dhcp_agent.ini在``[DEFAULT]``部分，配置Linuxbridge驱动接口，DHCP驱动并启用隔离元数据，这样在公共网络上的实例就可以通过网络来访问元数据[DEFAULT]interface_driver = neutron.agent.linux.interface.BridgeInterfaceDriverdhcp_driver = neutron.agent.linux.dhcp.Dnsmasqenable_isolated_metadata = True编辑/etc/neutron/metadata_agent.ini文件并完成以下操作：
[root@controller ~]# vim /etc/neutron/metadata_agent.ini在``[DEFAULT]`` 部分，配置元数据主机以及共享密码：[DEFAULT]nova_metadata_ip = controllermetadata_proxy_shared_secret = westos #指定共享密码为westos编辑/etc/nova/nova.conf文件并完成以下操作：
[root@controller ~]# vim /etc/nova/nova.conf[neutron]url = http://controller:9696auth_url = http://controller:35357auth_type = passwordproject_domain_name = defaultuser_domain_name = defaultregion_name = RegionOneproject_name = service username = neutronpassword = neutron service_metadata_proxy = Truemetadata_proxy_shared_secret = westos【1】、网络服务初始化脚本需要一个超链接 /etc/neutron/plugin.ini指向ML2插件配置文件/etc/neutron/plugins/ml2/ml2_conf.ini。如果超链接不存在，使用下面的命令创建它：
[root@controller ~]# ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini【2】、同步数据库，并查看数据库是否同步成功
[root@controller ~]# su -s /bin/sh -c "neutron-db-manage --config-file /etc/neutron/neutron.conf \ --config-file /etc/neutron/plugins/ml2/ml2_conf.ini upgrade head" neutron ... OK [root@controller ~]# mysql -uroot -p Enter password: #输入密码 MariaDB [(none)]> use neutron; MariaDB [neutron]> show tables; +-----------------------------------------+ | Tables_in_neutron | +-----------------------------------------+ | address_scopes | | agents | | alembic_version | | allowedaddresspairs | | arista_provisioned_nets | | arista_provisioned_tenants | | arista_provisioned_vms | | auto_allocated_topologies | | bgp_peers | | bgp_speaker_dragent_bindings | | bgp_speaker_network_bindings | | bgp_speaker_peer_bindings | | bgp_speakers | | brocadenetworks | | brocadeports | | cisco_csr_identifier_map | | cisco_hosting_devices | | cisco_ml2_apic_contracts | | cisco_ml2_apic_host_links | | cisco_ml2_apic_names | | cisco_ml2_n1kv_network_bindings | | cisco_ml2_n1kv_network_profiles | | cisco_ml2_n1kv_policy_profiles | | cisco_ml2_n1kv_port_bindings | | cisco_ml2_n1kv_profile_bindings | | cisco_ml2_n1kv_vlan_allocations | | cisco_ml2_n1kv_vxlan_allocations | | cisco_ml2_nexus_nve | | cisco_ml2_nexusport_bindings | | cisco_port_mappings | | cisco_router_mappings | | consistencyhashes | | default_security_group | | dnsnameservers | | dvr_host_macs | | externalnetworks | | extradhcpopts | | firewall_policies | | firewall_rules | | firewalls | | flavors | | flavorserviceprofilebindings | | floatingipdnses | | floatingips | | ha_router_agent_port_bindings | | ha_router_networks | | ha_router_vrid_allocations | | healthmonitors | | ikepolicies | | ipallocationpools | | ipallocations | | ipamallocationpools | | ipamallocations | | ipamavailabilityranges | | ipamsubnets | | ipavailabilityranges | | ipsec_site_connections | | ipsecpeercidrs | | ipsecpolicies | | lsn | | lsn_port | | maclearningstates | | members | | meteringlabelrules | | meteringlabels | | ml2_brocadenetworks | | ml2_brocadeports | | ml2_dvr_port_bindings | | ml2_flat_allocations | | ml2_geneve_allocations | | ml2_geneve_endpoints | | ml2_gre_allocations | | ml2_gre_endpoints | | ml2_network_segments | | ml2_nexus_vxlan_allocations | | ml2_nexus_vxlan_mcast_groups | | ml2_port_binding_levels | | ml2_port_bindings | | ml2_ucsm_port_profiles | | ml2_vlan_allocations | | ml2_vxlan_allocations | | ml2_vxlan_endpoints | | multi_provider_networks | | networkconnections | | networkdhcpagentbindings | | networkdnsdomains | | networkgatewaydevicereferences | | networkgatewaydevices | | networkgateways | | networkqueuemappings | | networkrbacs | | networks | | networksecuritybindings | | neutron_nsx_network_mappings | | neutron_nsx_port_mappings | | neutron_nsx_router_mappings | | neutron_nsx_security_group_mappings | | nexthops | | nsxv_edge_dhcp_static_bindings | | nsxv_edge_vnic_bindings | | nsxv_firewall_rule_bindings | | nsxv_internal_edges | | nsxv_internal_networks | | nsxv_port_index_mappings | | nsxv_port_vnic_mappings | | nsxv_router_bindings | | nsxv_router_ext_attributes | | nsxv_rule_mappings | | nsxv_security_group_section_mappings | | nsxv_spoofguard_policy_network_mappings | | nsxv_tz_network_bindings | | nsxv_vdr_dhcp_bindings | | nuage_net_partition_router_mapping | | nuage_net_partitions | | nuage_provider_net_bindings | | nuage_subnet_l2dom_mapping | | poolloadbalanceragentbindings | | poolmonitorassociations | | pools | | poolstatistiCSS | | portbindingports | | portdnses | | portqueuemappings | | ports | | portsecuritybindings | | providerresourceassociations | | qos_bandwidth_limit_rules | | qos_network_policy_bindings | | qos_policies | | qos_port_policy_bindings | | qospolicyrbacs | | qosqueues | | quotas | | quotausages | | reservations | | resourcedeltas | | router_extra_attributes | | routerl3agentbindings | | routerports | | routerroutes | | routerrules | | routers | | securitygroupportbindings | | securitygrouprules | | securitygroups | | serviceprofiles | | sessionpersistences | | standardattributes | | subnetpoolprefixes | | subnetpools | | subnetroutes | | subnets | | tags | | tz_network_bindings | | vcns_router_bindings | | vips | | vpnservices | +-----------------------------------------+ 157 rows in set (0.00 sec) MariaDB [neutron]> ^DBye #退出数据库客户端【3】、重启计算API 服务：
[root@controller ~]# systemctl restart openstack-nova-api.service【4】、当系统启动时，启动 Networking 服务并配置它启动。
对于两种网络选项：
[root@controller ~]# systemctl enable neutron-server.service \ > neutron-linuxbridge-agent.service neutron-dhcp-agent.service \ > neutron-metadata-agent.service [root@controller ~]# systemctl start neutron-server.service \ > neutron-linuxbridge-agent.service neutron-dhcp-agent.service \ > neutron-metadata-agent.service查看代理是否配置成功
[root@controller ~]# neutron agent-list +----------+------------+----------+-------------------+-------+----------------+---------------+ | id | agent_type | host | availability_zone | alive | admin_state_up | binary | +----------+------------+----------+-------------------+-------+----------------+---------------+ | 054d7873 | Metadata | controll | | :-) | True | neutron- | | -d9d8 | agent | er | | | | metadata- | | -468a- | | | | | | agent | | 86bd-622 | | | | | | | | e899b6b2 | | | | | | | | d | | | | | | | | 3c56880f | DHCP agent | controll | nova | :-) | True | neutron-dhcp- | | -e307 | | er | | | | agent | | -4bfa-8f | | | | | | | | 39-547cb | | | | | | | | 2fc0313 | | | | | | | | e36e88bb | Linux | controll | | :-) | True | neutron- | | -7395-4b | bridge | er | | | | linuxbridge- | | 00-9d19- | agent | | | | | agent | | fb3fab47 | | | | | | | | 6061 | | | | | | | +----------+------------+----------+-------------------+-------+----------------+---------------+（1）安装组件
[root@compute1 ~]# yum install openstack-neutron-linuxbridge ebtables ipset -y（2）配置通用组件
编辑/etc/neutron/neutron.conf 文件并完成如下操作：
[root@compute1 ~]# vim /etc/neutron/neutron.conf 在 “[DEFAULT]” 和 “[oslo_messaging_rabbit]”部分，配置 “RabbitMQ” 消息队列的连接： [DEFAULT] rpc_backend = rabbit [oslo_messaging_rabbit] rabbit_host = controller rabbit_userid = openstack rabbit_password = openstack 在 “[DEFAULT]” 和 “[keystone_authtoken]” 部分，配置认证服务访问： [DEFAULT] ... auth_strategy = keystone [keystone_authtoken] auth_uri = http://controller:5000 auth_url = http://controller:35357 memcached_servers = controller:11211 auth_type = password project_domain_name = default user_domain_name = default project_name = service username = neutron password = neutron 在 [oslo_concurrency] 部分，配置锁路径： [oslo_concurrency] lock_path = /var/lib/neutron/tmp（3）配置网络选项1：公共网络
【1】、配置Linuxbridge代理
编辑/etc/neutron/plugins/ml2/linuxbridge_agent.ini文件并且完成以下操作：
[root@compute1 ~]# vim /etc/neutron/plugins/ml2/linuxbridge_agent.ini 在``[linux_bridge]``部分，将公共虚拟网络和公共物理网络接口对应起来： [linux_bridge] physical_interface_mappings = provider:eth2 在``[vxlan]``部分，禁止VXLAN覆盖网络： [vxlan] enable_vxlan = False 在 ``[securitygroup]``部分，启用安全组并配置 Linuxbridge iptables firewall driver: [securitygroup] enable_security_group = True firewall_driver = neutron.agent.linux.iptables_firewall.IptablesFirewallDriver（4）为计算节点配置网络服务
编辑/etc/nova/nova.conf文件并完成下面的操作：
[root@compute1 ~]# vim /etc/nova/nova.conf 在``[neutron]`` 部分，配置访问参数： [neutron] url = http://controller:9696 auth_url = http://controller:35357 auth_type = password project_domain_name = default user_domain_name = default region_name = RegionOne project_name = service username = neutron password = neutron（5）完成安装
【1】、重启计算服务：
[root@compute1 ~]# systemctl restart openstack-nova-compute.service【2】、启动Linuxbridge代理并配置它开机自启动：
[root@compute1 ~]# systemctl enable neutron-linuxbridge-agent.service [root@compute1 ~]# systemctl start neutron-linuxbridge-agent.service在控制节点上：查看代理是否配置成功（是否增加了来自于compute1主机的Linux bridge agent）
[root@controller ~]# neutron agent-list +----------+------------+----------+-------------------+-------+----------------+---------------+ | id | agent_type | host | availability_zone | alive | admin_state_up | binary | +----------+------------+----------+-------------------+-------+----------------+---------------+ | 054d7873 | Metadata | controll | | :-) | True | neutron- | | -d9d8 | agent | er | | | | metadata- | | -468a- | | | | | | agent | | 86bd-622 | | | | | | | | e899b6b2 | | | | | | | | d | | | | | | | | 3c56880f | DHCP agent | controll | nova | :-) | True | neutron-dhcp- | | -e307 | | er | | | | agent | | -4bfa-8f | | | | | | | | 39-547cb | | | | | | | | 2fc0313 | | | | | | | | be3f1b28 | Linux | compute1 | | :-) | True | neutron- | | -cced-47 | bridge | | | | | linuxbridge- | | b0-b497- | agent | | | | | agent | | 3e8acd45 | | | | | | | | fb04 | | | | | | | | e36e88bb | Linux | controll | | :-) | True | neutron- | | -7395-4b | bridge | er | | | | linuxbridge- | | 00-9d19- | agent | | | | | agent | | fb3fab47 | | | | | | | | 6061 | | | | | | | +----------+------------+----------+-------------------+-------+----------------+---------------+【1】、在控制节点上，加载 admin 凭证来获取管理员能执行的命令访问权限：
[root@controller ~]# source admin-openrc【2】、创建网络：
[root@controller ~]# neutron net-create --shared --provider:physical_network provider \ > --provider:network_type flat provider Created a new network: +---------------------------+--------------------------------------+ | Field | Value | +---------------------------+--------------------------------------+ | admin_state_up | True | | availability_zone_hints | | | availability_zones | | | created_at | 2019-04-19T07:27:01 | | description | | | id | d8b14128-0eab-4ad2-8f5f-9a7ffd46ed25 | | ipv4_address_scope | | | ipv6_address_scope | | | mtu | 1500 | | name | provider | | port_security_enabled | True | | provider:network_type | flat | | provider:physical_network | provider | | provider:segmentation_id | | | router:external | False | | shared | True | | status | ACTIVE | | subnets | | | tags | | | tenant_id | 0ab00c48d2b94493b654f33f2eb5a579 | | updated_at | 2019-04-19T07:27:01 | +---------------------------+--------------------------------------+【3】、在网络上创建一个子网：
[root@controller ~]# neutron subnet-create --name provider --allocation-pool start=172.25.83.100,end=172.25.83.200 --dns-nameserver 114.114.114.114 --gateway 172.25.83.83 provider 172.25.83.0/24Created a new subnet:+-------------------+----------------------------------------------------+| Field | Value |+-------------------+----------------------------------------------------+| allocation_pools | {"start": "172.25.83.100", "end": "172.25.83.200"} || cidr | 172.25.83.0/24 || created_at | 2019-04-19T07:29:20 || description | || dns_nameservers | 114.114.114.114 || enable_dhcp | True || gateway_ip | 172.25.83.83 || host_routes | || id | 0662303e-9eb9-4de4-94b8-488b5829d096 || ip_version | 4 || ipv6_address_mode | || ipv6_ra_mode | || name | provider || network_id | d8b14128-0eab-4ad2-8f5f-9a7ffd46ed25 || subnetpool_id | || tenant_id | 0ab00c48d2b94493b654f33f2eb5a579 || updated_at | 2019-04-19T07:29:20 |+-------------------+----------------------------------------------------+[root@controller ~]# openstack flavor create --id 0 --vcpus 1 --ram 64 --disk 1 m1.nano+----------------------------+---------+| Field | Value |+----------------------------+---------+| OS-FLV-DISABLED:disabled | False || OS-FLV-EXT-DATA:ephemeral | 0 || disk | 1 || id | 0 || name | m1.nano || os-flavor-access:is_public | True || ram | 64 || rxtx_factor | 1.0 || swap | || vcpus | 1 |（1）导入租户demo的凭证
[root@controller ~]# source demo-openrc（2）生成和添加秘钥对：
[root@controller ~]# ssh-keygen -q -N "" Enter file in which to save the key (/root/.ssh/id_rsa): #直接敲击回车 [root@controller ~]# [root@controller ~]# openstack keypair create --public-key ~/.ssh/id_rsa.pub mykey +-------------+-------------------------------------------------+ | Field | Value | +-------------+-------------------------------------------------+ | fingerprint | 59:9f:db:f0:b6:b8:0d:a4:d5:5e:06:45:06:d2:96:a7 | | name | mykey | | user_id | c058d3e4f37940dc94ee618826e4ef6f |（3）验证公钥的添加：
[root@controller ~]# openstack keypair list +-------+-------------------------------------------------+ | Name | Fingerprint | +-------+-------------------------------------------------+ | mykey | 59:9f:db:f0:b6:b8:0d:a4:d5:5e:06:45:06:d2:96:a7 | +-------+-------------------------------------------------+（1）添加规则到 default 安全组。
允许 ICMP (ping)：
[root@controller ~]# openstack security group rule create --proto icmp default +-----------------------+--------------------------------------+ | Field | Value | +-----------------------+--------------------------------------+ | id | c6457fa3-d12a-4003-bb38-e37c371b90d1 | | ip_protocol | icmp | | ip_range | 0.0.0.0/0 | | parent_group_id | 3ea37732-fff0-47a9-aacb-27c1eb0f736a | | port_range | | | remote_security_group | | +-----------------------+--------------------------------------+允许安全 shell (SSH) 的访问：
[root@controller ~]# openstack security group rule create --proto tcp --dst-port 22 default +-----------------------+--------------------------------------+ | Field | Value | +-----------------------+--------------------------------------+ | id | aa5fb305-7a76-487e-8015-3ef693151247 | | ip_protocol | tcp | | ip_range | 0.0.0.0/0 | | parent_group_id | 3ea37732-fff0-47a9-aacb-27c1eb0f736a | | port_range | 22:22 | | remote_security_group | | +-----------------------+--------------------------------------+【1】、在控制节点上，获得 demo 凭证
[root@controller ~]# source demo-openrc【2】、一个实例指定了虚拟机资源的大致分配，包括处理器、内存和存储。
列出可用类型：
[root@controller ~]# openstack flavor list+----+-----------+-------+------+-----------+-------+-----------+| ID | Name | RAM | Disk | Ephemeral | VCPUs | Is Public |+----+-----------+-------+------+-----------+-------+-----------+| 0 | m1.nano | 64 | 1 | 0 | 1 | True || 1 | m1.tiny | 512 | 1 | 0 | 1 | True || 2 | m1.small | 2048 | 20 | 0 | 1 | True || 3 | m1.medium | 4096 | 40 | 0 | 2 | True || 4 | m1.large | 8192 | 80 | 0 | 4 | True || 5 | m1.xlarge | 16384 | 160 | 0 | 8 | True |+----+-----------+-------+------+-----------+-------+-----------+【3】、列出可用镜像：
[root@controller ~]# openstack image list+--------------------------------------+--------+--------+| ID | Name | Status |+--------------------------------------+--------+--------+| fe68d600-2b20-45de-8391-2d3eecdaca4e | cirros | active |+--------------------------------------+--------+--------+【4】、列出可用网络：
[root@controller ~]# openstack network list+--------------------------------------+----------+--------------------------------------+| ID | Name | Subnets |+--------------------------------------+----------+--------------------------------------+| d8b14128-0eab-4ad2-8f5f-9a7ffd46ed25 | provider | 0662303e-9eb9-4de4-94b8-488b5829d096 |+--------------------------------------+----------+--------------------------------------+【5】、列出可用的安全组：
[root@controller ~]# openstack security group list+--------------------------+---------+------------------------+---------------------------+| ID | Name | Description | Project |+--------------------------+---------+------------------------+---------------------------+| 3ea37732-fff0-47a9-aacb- | default | Default security group | 4bf385a6bf92458194acf7a2f || 27c1eb0f736a | | | aef794b |+--------------------------+---------+------------------------+---------------------------+【1】、启动实例：
[root@controller ~]# openstack server create --flavor m1.nano --image cirros --nic net-id=d8b14128-0eab-4ad2-8f5f-9a7ffd46ed25 --security-group default --key-name mykey server1+--------------------------------------+-----------------------------------------------+ | Field | Value | +--------------------------------------+-----------------------------------------------+ | OS-DCF:diskConfig | MANUAL | | OS-EXT-AZ:availability_zone | | | OS-EXT-STS:power_state | 0 | | OS-EXT-STS:task_state | scheduling | | OS-EXT-STS:vm_state | building | | OS-SRV-USG:launched_at | None | | OS-SRV-USG:terminated_at | None | | accessIPv4 | | | accessIPv6 | | | addresses | | | adminPass | k9Bw95Z3dpMv | | config_drive | | | created | 2019-04-19T08:09:18Z | | flavor | m1.nano (0) | | hostId | | | id | 5d7c18d4-d9d4-4edf-a0b6-0503b31421db | | image | cirros (fe68d600-2b20-45de-8391-2d3eecdaca4e) | | key_name | mykey | | name | server1 | | os-extended-volumes:volumes_attached | [] | | progress | 0 | | project_id | 4bf385a6bf92458194acf7a2faef794b | | properties | | | security_groups | [{u'name': u'default'}] | | status | BUILD | | updated | 2019-04-19T08:09:19Z | | user_id | c058d3e4f37940dc94ee618826e4ef6f | +--------------------------------------+-----------------------------------------------+【2】、检查实例的状态：
[root@controller ~]# openstack server list +--------------------------------------+---------+--------+------------------------+ | ID | Name | Status | Networks | +--------------------------------------+---------+--------+------------------------+ | 5d7c18d4-d9d4-4edf-a0b6-0503b31421db | server1 | ACTIVE | provider=172.25.83.101 | +--------------------------------------+---------+--------+------------------------+【1】、获取你实例的 Virtual Network Computing (VNC) 会话URL并从web浏览器访问它：
[root@controller ~]# openstack console url show server1 +-------+---------------------------------------------------------------------------------+ | Field | Value | +-------+---------------------------------------------------------------------------------+ | type | novnc | | url | http://controller:6080/vnc_auto.html?token=79076f9f-4af0-41e5-b122-f008ce471f88 | +-------+---------------------------------------------------------------------------------+【2】、浏览器访问该url
在物理机的本地解析文件中添加controller的解析（这是因为要在物理机的浏览器中进行访问）
[root@foundation83 ~]# vim /etc/hosts172.25.83.1 controller
从上图，我们可以看到该实例有问题。导致这个问题的原因在于Centos7.3源中的qemu1.5版本低，更新一下qemu版本即可。解决方法如下：参见博客（https://blog.csdn.net/wjciayf/article/details/73741146）
在计算节点上进行操作：
[root@compute1 ~]# virsh version Compiled against library: libvirt 2.0.0 Using library: libvirt 2.0.0 Using API: QEMU 2.0.0 Running hypervisor: QEMU 1.5.3 [root@compute1 ~]# ls #在网上下载关于qemu的软件 qemu [root@compute1 ~]# cd qemu/ [root@compute1 qemu]# ls libcacard-2.5.2-2.1.el7.x86_64.rpm qemu-kvm-common-ev-2.6.0-28.el7.10.1.x86_64.rpm qemu-img-ev-2.6.0-28.el7.10.1.x86_64.rpm qemu-kvm-ev-2.6.0-28.el7.10.1.x86_64.rpm [root@compute1 qemu]# yum install * -y [root@compute1 qemu]# virsh version Compiled against library: libvirt 2.0.0 Using library: libvirt 2.0.0 Using API: QEMU 2.0.0 Running hypervisor: QEMU 2.6.0 #可以看到版本由原来的1.5.3变为了现在的2.6.0在控制节点上：重启server1
[root@controller ~]# openstack server stop server1 [root@controller ~]# openstack server list +----------------------+---------+---------+-----------------------+ | ID | Name | Status | Networks | +----------------------+---------+---------+-----------------------+ | 5d7c18d4-d9d4-4edf- | server1 | SHUTOFF | provider=172.25.83.10 | | a0b6-0503b31421db | | | 1 | +----------------------+---------+---------+-----------------------+ [root@controller ~]# openstack server start server1 [root@controller ~]# openstack server list +-----------------------+---------+--------+-----------------------+ | ID | Name | Status | Networks | +-----------------------+---------+--------+-----------------------+ | 5d7c18d4-d9d4-4edf- | server1 | ACTIVE | provider=172.25.83.10 | | a0b6-0503b31421db | | | 1 | +-----------------------+---------+--------+-----------------------+ [root@controller ~]# openstack console url show server1 +-------+----------------------------------------------------------+ | Field | Value | +-------+----------------------------------------------------------+ | type | novnc | | url | http://controller:6080/vnc_auto.html?token=b022d4aa- | | | 37ea-459b-a3ff-2049db66333e | +-------+----------------------------------------------------------+在浏览器访问这个新的url
从上图，我们可以看到该实例有问题。、解决方法如下：参见博客（https://blog.csdn.net/a610616898/article/details/69788360）
在计算节点上进行操作：
[root@compute1 ~]# vim /etc/nova/nova.conf [libvirt] virt_type = qemu cpu_mode = none #新添加的内容 [root@compute1 ~]# systemctl restart openstack-nova-compute #修改完配置文件之后,重启服务在控制节点上：重启server1
[root@controller ~]# openstack server stop server1 [root@controller ~]# openstack server list +----------------------+---------+---------+-----------------------+ | ID | Name | Status | Networks | +----------------------+---------+---------+-----------------------+ | 5d7c18d4-d9d4-4edf- | server1 | SHUTOFF | provider=172.25.83.10 | | a0b6-0503b31421db | | | 1 | +----------------------+---------+---------+-----------------------+ [root@controller ~]# openstack server start server1 [root@controller ~]# openstack server list +-----------------------+---------+--------+-----------------------+ | ID | Name | Status | Networks | +-----------------------+---------+--------+-----------------------+ | 5d7c18d4-d9d4-4edf- | server1 | ACTIVE | provider=172.25.83.10 | | a0b6-0503b31421db | | | 1 | +-----------------------+---------+--------+-----------------------+ [root@controller ~]# openstack console url show server1 +-------+---------------------------------------------------------------------------------+ | Field | Value | +-------+---------------------------------------------------------------------------------+ | type | novnc | | url | http://controller:6080/vnc_auto.html?token=46662814-8a2c-49dd-910a-47e5606a4993 | +-------+---------------------------------------------------------------------------------+在浏览器访问这个新的url
以“cirrors”用户的身份，“cubswin:)“密码，进行登陆
从上图，我们可以看到server1分配到的ip为172.25.83.101。
在web界面登陆成功之后，我们可以在远程利用ssh的方式，进行免密连接
[root@controller ~]# ssh cirros@172.25.83.101 The authenticity of host '172.25.83.101 (172.25.83.101)' can't be established. RSA key fingerprint is 1e:bd:0e:10:4c:cb:d5:b5:d2:79:51:91:d9:ed:f3:9c. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '172.25.83.101' (RSA) to the list of known hosts. $ ip a 1: lo:mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0:mtu 1500 qdisc pfifo_fast qlen 1000 link/ether fa:16:3e:94:eb:0a brd ff:ff:ff:ff:ff:ff inet 172.25.83.101/24 brd 172.25.83.255 scope global eth0 inet6 fe80::f816:3eff:fe94:eb0a/64 scope link valid_lft forever preferred_lft forever $ ping 172.25.83.2 PING 172.25.83.2 (172.25.83.2): 56 data bytes 64 bytes from 172.25.83.2: seq=0 ttl=64 time=1.136 ms ^C --- 172.25.83.2 ping statistics --- 1 packets transmitted, 1 packets received, 0% packet loss round-trip min/avg/max = 1.136/1.136/1.136 ms [root@controller ~]# openstack server create --flavor m1.nano --image cirros --nic net-id=d8b14128-0eab-4ad2-8f5f-9a7ffd46ed25 --security-group default --key-name mykey server2 +--------------------------------------+-----------------------------------------------+ | Field | Value | +--------------------------------------+-----------------------------------------------+ | OS-DCF:diskConfig | MANUAL | | OS-EXT-AZ:availability_zone | | | OS-EXT-STS:power_state | 0 | | OS-EXT-STS:task_state | scheduling | | OS-EXT-STS:vm_state | building | | OS-SRV-USG:launched_at | None | | OS-SRV-USG:terminated_at | None | | accessIPv4 | | | accessIPv6 | | | addresses | | | adminPass | 3Lme7tei4JDE | | config_drive | | | created | 2019-04-19T09:08:50Z | | flavor | m1.nano (0) | | hostId | | | id | 28aa033b-db84-4497-abef-34e6e5c1d949 | | image | cirros (fe68d600-2b20-45de-8391-2d3eecdaca4e) | | key_name | mykey | | name | server2 | | os-extended-volumes:volumes_attached | [] | | progress | 0 | | project_id | 4bf385a6bf92458194acf7a2faef794b | | properties | | | security_groups | [{u'name': u'default'}] | | status | BUILD | | updated | 2019-04-19T09:08:50Z | | user_id | c058d3e4f37940dc94ee618826e4ef6f | +--------------------------------------+-----------------------------------------------+ [root@controller ~]# openstack server list +--------------------------------------+---------+--------+------------------------+ | ID | Name | Status | Networks | +--------------------------------------+---------+--------+------------------------+ | 28aa033b-db84-4497-abef-34e6e5c1d949 | server2 | ACTIVE | provider=172.25.83.102 | | 5d7c18d4-d9d4-4edf-a0b6-0503b31421db | server1 | ACTIVE | provider=172.25.83.101 | +--------------------------------------+---------+--------+------------------------+ [root@controller ~]# openstack console url show server2 +-------+---------------------------------------------------------------------------------+ | Field | Value | +-------+---------------------------------------------------------------------------------+ | type | novnc | | url | http://controller:6080/vnc_auto.html?token=31353e55-4682-4d84-a56a-7fd4364e8b22 | +-------+---------------------------------------------------------------------------------+在浏览器访问server2的url
从上图，我们可以看到server2分配到的ip为172.25.83.102。
在web界面登陆成功之后，我们可以在远程利用ssh的方式，进行免密连接
#在真机对iptables进行设置,使得虚拟机可以上网 [root@foundation83 ~]# iptables -t nat -I POSTROUTING -s 172.25.83.0/24 -j MASQUERADE [root@controller ~]# ssh cirros@172.25.83.102 The authenticity of host '172.25.83.102 (172.25.83.102)' can't be established. RSA key fingerprint is 54:cb:b0:70:16:0f:d4:f7:77:ab:d8:cd:4c:04:a8:e3. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '172.25.83.102' (RSA) to the list of known hosts. $ ip a 1: lo:mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0:mtu 1500 qdisc pfifo_fast qlen 1000 link/ether fa:16:3e:70:16:1d brd ff:ff:ff:ff:ff:ff inet 172.25.83.102/24 brd 172.25.83.255 scope global eth0 inet6 fe80::f816:3eff:fe70:161d/64 scope link valid_lft forever preferred_lft forever $ ping 172.25.83.101 PING 172.25.83.101 (172.25.83.101): 56 data bytes 64 bytes from 172.25.83.101: seq=0 ttl=64 time=7.321 ms ^C --- 172.25.83.101 ping statistics --- 1 packets transmitted, 1 packets received, 0% packet loss round-trip min/avg/max = 7.321/7.321/7.321 ms PING www.baidu.com (220.181.112.244): 56 data bytes 64 bytes from 220.181.112.244: seq=0 ttl=50 time=24.378 ms 64 bytes from 220.181.112.244: seq=1 ttl=50 time=23.232 ms ^C --- www.baidu.com ping statistics --- 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max = 23.232/23.805/24.378 ms在计算节点端可以看到开启了几个云主机
[root@compute1 ~]# virsh list Id Name State ---------------------------------------------------- 3 instance-00000001 running 4 instance-00000002 running感谢你能够认真阅读完这篇文章，希望小编分享的“Linux系统如何安装OpenStack”这篇文章对大家有帮助，同时也希望大家多多支持编程网，关注编程网操作系统频道，更多相关知识等着你来学习!
--结束END--
本文标题: Linux系统如何安装OpenStack
本文链接: https://www.lsjlt.com/news/319963.html(转载时请注明来源链接)
有问题或投稿请发送至: 邮箱/279061341@qq.com QQ/279061341
下载Word文档到电脑，方便收藏和打印～
2024-03-01
2024-03-01
2024-03-01
2024-03-01
2024-03-01
2024-02-29
2024-02-29
2024-02-29
2024-02-29
2024-02-29
回答
回答
回答
回答
回答
回答
回答
回答
回答
回答
一口价域名售卖能注册吗？域名是网站的标识，简短且易于记忆，为在线用户提供了访问我们网站的简单路径。一口价是在域名交易中一种常见的模式，而这种通常是针对已经被注册的域名转售给其他人的一种方式。
一口价域名买卖的过程通常包括以下几个步骤：
1.寻找：买家需要在域名售卖平台上找到心仪的一口价域名。平台通常会为每个可售的域名提供详细的描述，包括价格、年龄、流
443px" 443px) https://www.west.cn/docs/wp-content/uploads/2024/04/SEO图片294.jpg https://www.west.cn/docs/wp-content/uploads/2024/04/SEO图片294-768x413.jpg 域名售卖 域名一口价售卖 游戏音频 赋值/切片 框架优势 评估指南 项目规模 安全指南 Osprey 游戏分析 游戏调试 游戏图形 游戏物理 开源库
官方手机版
微信公众号
商务合作
0