前言

在Apollo星火计划学习笔记——Apollo路径规划算法原理与实践与【Apollo学习笔记】——Planning模块讲到……Stage::Process的PlanOnReferenceLine函数会依次调用task_list中的TASK，本文将会继续以LaneFollow为例依次介绍其中的TASK部分究竟做了哪些工作。由于个人能力所限，文章可能有纰漏的地方，还请批评斧正。

在modules/planning/conf/scenario/lane_follow_config.pb.txt配置文件中，我们可以看到LaneFollow所需要执行的所有task。

stage_config: {  stage_type: LANE_FOLLOW_DEFAULT_STAGE  enabled: true  task_type: LANE_CHANGE_DECIDER  task_type: PATH_REUSE_DECIDER  task_type: PATH_LANE_BORROW_DECIDER  task_type: PATH_BOUNDS_DECIDER  task_type: PIECEWISE_JERK_PATH_OPTIMIZER  task_type: PATH_ASSESSMENT_DECIDER  task_type: PATH_DECIDER  task_type: RULE_BASED_STOP_DECIDER  task_type: SPEED_BOUNDS_PRIORI_DECIDER  task_type: SPEED_HEURISTIC_OPTIMIZER  task_type: SPEED_DECIDER  task_type: SPEED_BOUNDS_FINAL_DECIDER  task_type: PIECEWISE_JERK_SPEED_OPTIMIZER  # task_type: PIECEWISE_JERK_NONLINEAR_SPEED_OPTIMIZER  task_type: RSS_DECIDER

本文将继续介绍LaneFollow的第7个TASK——PATH_DECIDER

PATH_DECIDER功能简介

根据选出的路径给出对障碍物的决策

若是绕行的路径，则产生绕行的决策；若前方有障碍物阻塞，则产生停止的决策。

PATH_DECIDER相关配置

modules/planning/conf/planning_config.pb.txt

default_task_config: {  task_type: PATH_DECIDER  path_decider_config{    static_obstacle_buffer: 0.3  }}

modules/planning/proto/task_config.proto

//// PathDeciderConfigmessage PathDeciderConfig {  // buffer for static obstacles (meter)  optional double static_obstacle_buffer = 1 [default = 0.3];}

PATH_DECIDER总体流程

输入:

Status PathDecider::Process(const ReferenceLineInfo *reference_line_info,const PathData &path_data,PathDecision *const path_decision) {

输出:
路径决策的信息都保存到了path_decision中。

路径决策代码流程及框架

在Process函数主要功能是调用了MakeObjectDecision函数。而在MakeObjectDecision函数中调用了MakeStaticObstacleDecision函数。

路径决策的主要功能都在MakeStaticObstacleDecision中。这部分代码还是比较清晰的。

Status PathDecider::Process(const ReferenceLineInfo *reference_line_info,const PathData &path_data,PathDecision *const path_decision) {  // skip path_decider if reused path  if (FLAGS_enable_skip_path_tasks && reference_line_info->path_reusable()) {    return Status::OK();  }  std::string blocking_obstacle_id;  if (reference_line_info->GetBlockinGobstacle() != nullptr) {    blocking_obstacle_id = reference_line_info->GetBlockingObstacle()->Id();  }  // 调用MakeObjectDecision函数  if (!MakeObjectDecision(path_data, blocking_obstacle_id, path_decision)) {    const std::string msg = "Failed to make decision based on tunnel";    AERROR << msg;    return Status(ErrorCode::PLANNING_ERROR, msg);  }  return Status::OK();}bool PathDecider::MakeObjectDecision(const PathData &path_data,         const std::string &blocking_obstacle_id,         PathDecision *const path_decision) {  // path decider的主要功能在MakeStaticObstacleDecision中  if (!MakeStaticObstacleDecision(path_data, blocking_obstacle_id,      path_decision)) {    AERROR << "Failed to make decisions for static obstacles";    return false;  }  return true;}

MakeStaticObstacleDecision

获取frenet坐标系下的坐标

  ... ...  // 1.获取frenet坐标下的path路径  const auto &frenet_path = path_data.frenet_frame_path();  if (frenet_path.empty()) {    AERROR << "Path is empty.";    return false;  }  ... ...

根据障碍物做决策

  ... ...  // 2.遍历每个障碍物，做决策  for (const auto *obstacle : path_decision->obstacles().Items()) {    const std::string &obstacle_id = obstacle->Id();    const std::string obstacle_type_name =        PerceptionObstacle_Type_Name(obstacle->Perception().type());    ADEBUG << "obstacle_id[<< " << obstacle_id << "] type["           << obstacle_type_name << "]";    ... ...

如果障碍物不是静态或virtual，则跳过

    // 2.1 如果障碍物不是静态的或者是virtual的，就跳过    if (!obstacle->IsStatic() || obstacle->IsVirtual()) {    // （stop fence，各种fence）      continue;    }

如果障碍物有了ignore/stop决策，则跳过

    // 2.2 如果障碍物已经有 ignore/stop 决策，就跳过    if (obstacle->HasLongitudinalDecision() &&        obstacle->LongitudinalDecision().has_ignore() &&        obstacle->HasLateralDecision() &&        obstacle->LateralDecision().has_ignore()) {      continue;    }    if (obstacle->HasLongitudinalDecision() &&        obstacle->LongitudinalDecision().has_stop()) {      // STOP decision      continue;    }

如果障碍物挡住了路径，加stop决策

    // 2.3 如果障碍物挡住了路径，加stop决策    if (obstacle->Id() == blocking_obstacle_id &&        !injector_->planning_context()             ->planning_status()             .path_decider()             .is_in_path_lane_borrow_scenario()) {      // Add stop decision      ADEBUG << "Blocking obstacle = " << blocking_obstacle_id;      ObjectDecisionType object_decision;      *object_decision.mutable_stop() = GenerateObjectStopDecision(*obstacle);      path_decision->AddLongitudinalDecision("PathDecider/blocking_obstacle",                 obstacle->Id(), object_decision);      continue;    }

如果是clear-zone，跳过

    // 2.4 如果是clear-zone，跳过    if (obstacle->reference_line_st_boundary().boundary_type() ==        STBoundary::BoundaryType::KEEP_CLEAR) {      continue;    }

如果障碍物不在路径上，跳过

    // 2.5 如果障碍物不在路径上，跳过    ObjectDecisionType object_decision;    object_decision.mutable_ignore();    const auto &sl_boundary = obstacle->PerceptionSLBoundary();    if (sl_boundary.end_s() < frenet_path.front().s() ||        sl_boundary.start_s() > frenet_path.back().s()) {      path_decision->AddLongitudinalDecision("PathDecider/not-in-s",                 obstacle->Id(), object_decision);      path_decision->AddLateralDecision("PathDecider/not-in-s", obstacle->Id(),            object_decision);      continue;    }

nudge判断

• 如果距离静态障碍物距离太远，则忽略。
• 如果静态障碍物距离车道中心太近，则停止。
• 如果横向方向很近，则避开。

    // 2.6 nudge判断，如果距离静态障碍物距离太远，则忽略。    //               如果静态障碍物距离车道中心太近，则停止。    //               如果横向方向很近，则避开。    if (curr_l - lateral_radius > sl_boundary.end_l() ||        curr_l + lateral_radius < sl_boundary.start_l()) {      // 1. IGNORE if laterally too far away.      path_decision->AddLateralDecision("PathDecider/not-in-l", obstacle->Id(),            object_decision);    } else if (sl_boundary.end_l() >= curr_l - min_nudge_l &&               sl_boundary.start_l() <= curr_l + min_nudge_l) {      // 2. STOP if laterally too overlapping.      *object_decision.mutable_stop() = GenerateObjectStopDecision(*obstacle);      if (path_decision->MergeWithMainStop(              object_decision.stop(), obstacle->Id(),              reference_line_info_->reference_line(),              reference_line_info_->AdcSlBoundary())) {        path_decision->AddLongitudinalDecision("PathDecider/nearest-stop",                   obstacle->Id(), object_decision);      } else {        ObjectDecisionType object_decision;        object_decision.mutable_ignore();        path_decision->AddLongitudinalDecision("PathDecider/not-nearest-stop",                   obstacle->Id(), object_decision);      }    } else {      // 3. NUDGE if laterally very close.      if (sl_boundary.end_l() < curr_l - min_nudge_l) {  // &&        // sl_boundary.end_l() > curr_l - min_nudge_l - 0.3) {        // LEFT_NUDGE        ObjectNudge *object_nudge_ptr = object_decision.mutable_nudge();        object_nudge_ptr->set_type(ObjectNudge::LEFT_NUDGE);        object_nudge_ptr->set_distance_l(            config_.path_decider_config().static_obstacle_buffer());        path_decision->AddLateralDecision("PathDecider/left-nudge",              obstacle->Id(), object_decision);      } else if (sl_boundary.start_l() > curr_l + min_nudge_l) {  // &&        // sl_boundary.start_l() < curr_l + min_nudge_l + 0.3) {        // RIGHT_NUDGE        ObjectNudge *object_nudge_ptr = object_decision.mutable_nudge();        object_nudge_ptr->set_type(ObjectNudge::RIGHT_NUDGE);        object_nudge_ptr->set_distance_l(            -config_.path_decider_config().static_obstacle_buffer());        path_decision->AddLateralDecision("PathDecider/right-nudge",              obstacle->Id(), object_decision);      }    }

PATH_DECIDER相关子函数

GenerateObjectStopDecision主要用以生成停止决策。

ObjectStop PathDecider::GenerateObjectStopDecision(    const Obstacle &obstacle) const {  ObjectStop object_stop;  // Calculate stop distance with the obstacle using the ADC's minimum turning radius  double stop_distance = obstacle.MinRadiusStopDistance(      VehicleConfigHelper::GetConfig().vehicle_param());  object_stop.set_reason_code(StopReasonCode::STOP_REASON_OBSTACLE);  object_stop.set_distance_s(-stop_distance);  // 停止时的参考位置  const double stop_ref_s =      obstacle.PerceptionSLBoundary().start_s() - stop_distance;  const auto stop_ref_point =      reference_line_info_->reference_line().GetReferencePoint(stop_ref_s);  object_stop.mutable_stop_point()->set_x(stop_ref_point.x());  object_stop.mutable_stop_point()->set_y(stop_ref_point.y());  object_stop.set_stop_heading(stop_ref_point.heading());  return object_stop;}

对于停止距离的计算，会调用MinRadiusStopDistance函数,
modules/planning/common/obstacle.cc

double Obstacle::MinRadiusStopDistance(    const common::VehicleParam& vehicle_param) const {  if (min_radius_stop_distance_ > 0) {    return min_radius_stop_distance_;  }  // 定义一个停止距离的缓冲区0.5m  static constexpr double stop_distance_buffer = 0.5;  // 获取最小安全转弯半径  const double min_turn_radius = VehicleConfigHelper::MinSafeTurnRadius();  // 计算横向距离  double lateral_diff =      vehicle_param.width() / 2.0 + std::max(std::fabs(sl_boundary_.start_l()),                 std::fabs(sl_boundary_.end_l()));  const double kEpison = 1e-5;  lateral_diff = std::min(lateral_diff, min_turn_radius - kEpison);  // 勾股定理求得停止距离  double stop_distance =      std::sqrt(std::fabs(min_turn_radius * min_turn_radius -                          (min_turn_radius - lateral_diff) *  (min_turn_radius - lateral_diff))) +      stop_distance_buffer;  // 减掉车辆前端到后轴中心的距离  stop_distance -= vehicle_param.front_edge_to_center();  // 限幅  stop_distance = std::min(stop_distance, FLAGS_max_stop_distance_obstacle); // 10.0  stop_distance = std::max(stop_distance, FLAGS_min_stop_distance_obstacle); // 6.0  return stop_distance;}

计算示意图如下：

modules/common/configs/vehicle_config_helper.cc

double VehicleConfigHelper::MinSafeTurnRadius() {  const auto &param = vehicle_config_.vehicle_param();  double lat_edge_to_center =      std::max(param.left_edge_to_center(), param.right_edge_to_center());  double lon_edge_to_center =      std::max(param.front_edge_to_center(), param.back_edge_to_center());  return std::sqrt((lat_edge_to_center + param.min_turn_radius()) *                       (lat_edge_to_center + param.min_turn_radius()) +                   lon_edge_to_center * lon_edge_to_center);}

MinSafeTurnRadius这段函数是获取当车辆以最大转向角转弯时的最大安全转弯半径。具体计算参考下图：

$A,B,C,D$分别是车辆的四个角，$XO$是车辆的最小转弯半径VehicleParam.min_turn_radius()，$X$与$AD$之间的距离是左边缘到中心的距离left_edge_to_center，$X$与$AB$之间的距离是前边缘到中心的距离front_edge_to_center。最大安全转弯半径则是$AO$，定义中心到横向边缘最长的距离为$l_{lat}$，到纵向边缘最长的距离为$l_{lon}$，$AO$计算公式如下：
$$AO=\sqrt{(XO+l_{lat}{)}^2+{l_{lon}}^2}$$
个人感觉这么做是为了获得足够的安全冗余量。

参考

[1] 路径决策

来源地址：https://blog.csdn.net/sinat_52032317/article/details/132549818