广告

扫码关注官方微信

扫码下载APP
返回顶部
首页 > 资讯 > 数据库 >lsnrctl start启动监听很慢(AIX平台)
  • 557

0
分享到

lsnrctl start启动监听很慢(AIX平台)

2024-04-02 19:04:59 557人浏览 薄情痞子
摘要

今天登陆了一下公司aiX平台的oracle测试服务器，没有配置监听，由于手动配置监听后，启动监听，发现启动的时候很慢，日志如下： 欢迎大家加入ORACLE超级群：17115662 免费解决各种O

今天登陆了一下公司aiX平台的oracle测试服务器，没有配置监听，由于手动配置监听后，启动监听，发现启动的时候很慢，日志如下：

欢迎大家加入ORACLE超级群：17115662 免费解决各种ORACLE问题,以后BLOG将迁移到http://www.htz.pw

  1. [$(hostname):oracle:/u01/app/oracle/10.2.0/db_1/network/admin]lsnrctl start 
  2. LSNRCTL for IBM/AIX RISC System/6000: Version 10.2.0.1.0 - Production on 20-MAR-2013 21:52:46 
  3.  
  4. Copyright (c) 1991, 2005, Oracle.  All rights reserved. 
  5.  
  6.  
  7.  
  8.  
  9.  
  10. Starting /u01/app/oracle/10.2.0/db_1/bin/tnslsnr: please wait... 
  11.  
  12. TNSLSNR for IBM/AIX RISC System/6000: Version 10.2.0.1.0 - Production 
  13. System parameter file is /u01/app/oracle/10.2.0/db_1/network/admin/listener.ora 
  14. Log messages written to /u01/app/oracle/10.2.0/db_1/network/log/listener.log 
  15. Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=cdolm2)(PORT=1521))) 
  16. Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC0))) 
  17.  
  18. Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=cdolm2)(PORT=1521)))

停在这儿 ，truss进程

  1. [$(hostname):oracle:/home/oracle]truss -p 241908 
  2. connext(0, 0x0000000000000000, 0) (sleeping...) 
  3. connext(0, 0x0000000000000000, 0)               Err#78 ETIMEDOUT 
  4. close(3)                                        = 0 
  5. getsockopt(3, 65535, 4097, 0x0FFFFFFFFFFF7824, 0x0FFFFFFFFFFF7820) Err#9  EBADF 
  6. getsockopt(3, 65535, 4098, 0x0FFFFFFFFFFF7824, 0x0FFFFFFFFFFF7820) Err#9  EBADF 
  7. access("/tmp/.oracle", 0)                       = 0 
  8. chmod("/tmp/.oracle", 01777)                    Err#1  EPERM 
  9. Socket(1, 1, 0)                                 = 3 
  10. access("/tmp/.oracle/sEXTPROC0", 0)             Err#2  ENOENT 
  11. access("/tmp/o/sEXTPROC0", 0)                   Err#2  ENOENT 
  12. close(3)                                        = 0 
  13. open("/u01/app/oracle/10.2.0/db_1/network/mesg/tnsus.msb", O_RDONLY) = 3 
  14. kfcntl(3, F_SETFD, 0x0000000000000001)          = 0 
  15. lseek(3, 0, 0)                                  = 0 
  16. kread(3, "1513 "011303\t\t\0\0\0\0".., 256)     = 256 
  17. lseek(3, 512, 0)                                = 512 
  18. kread(3, " 19B\0\0\0\0\0\0\0\0\0\0".., 512)     = 512 
  19. lseek(3, 1024, 0)                               = 1024 
  20. kread(3, "\0\t\012\01A\0 &\0 -\0 F".., 170)     = 170 
  21. lseek(3, 19456, 0)                              = 19456 
  22. kread(3, "\00F04 $\0\0\0 b04 %\0\0".., 512)     = 512 
  23. kwrite(1, " S t a r t i n g   / u 0".., 66)     = 66 
  24. kfcntl(1, F_GETFL, 0x0000000000000008)          = 2 
  25. pipe(0x0FFFFFFFFFFFA548)                        = 0 
  26. pipe(0x0FFFFFFFFFFFA540)                        = 0 
  27. sigprocmask(0, 0x09001000A0198818, 0x09001000A01987F8) = 0 
  28. kfork()                                         = 200740 
  29. thread_setmystate(0x0FFFFFFFFFFF9F50, 0x0000000000000000) = 0 
  30. sigprocmask(0, 0x0FFFFFFFFFFFA420, 0x0000000000000000) = 0 
  31. sigprocmask(2, 0x09001000A0198818, 0x0FFFFFFFFFFFA130) = 0 
  32. _sigaction(13, 0x0FFFFFFFFFFFA260, 0x0FFFFFFFFFFFA290) = 0 
  33. thread_setmystate(0x0FFFFFFFFFFF9D20, 0x0000000000000000) = 0 
  34. sigprocmask(1, 0x0FFFFFFFFFFFA390, 0x0000000000000000) = 0 
  35. kwaitpid(0x0FFFFFFFFFFFA530, 200740, 4, 0x0000000000000000, 0x0000000000000000) = 200740 
  36. close(4)                                        = 0 
  37. close(7)                                        = 0 
  38. set -o vi 
  39. kread(6, " N T P 0   2 7 8 5 8 8\n".., 64)      = 12 
  40. _getpid()                                       = 241908 
  41. kfcntl(6, F_SETFD, 0x0000000000000001)          = 0 
  42. kwrite(5, "\0 001\0\0\001 901 ,".., 184)    = 184 
  43. kread(6, "\0\0\0\0\0\0\0\0\0\0\0\0".., 2064) (sleeping...) 
  44. kread(6, "\0  \0\002\0\0\001 9\0\0".., 2064)    = 32 
  45. kread(6, "01 }\0\006\0\0\0\0\0 T N".., 2064)    = 381 
  46. kwrite(1, " T N S L S N R   f o r  ".., 371)    = 371 
  47. kwrite(1, "\n", 1)                              = 1 
  48. close(5)                                        = 0 
  49. close(6)                                        = 0 
  50. getuidx(2)                                      = 202 
  51. __libc_sbrk(0x0000000000010020)                 = 0x00000000106044E0 
  52. open("/etc/passwd", O_RDONLY)                   = 4 
  53. kioctl(4, 22528, 0x0000000000000000, 0x0000000000000000) Err#25 ENOTTY 
  54. kfcntl(4, F_GETFD, 0x0000000000000000)          = 0 
  55. kfcntl(4, F_SETFD, 0x0000000000000001)          = 0 
  56. accessx("/etc/security/passwd", 04, 0)          Err#13 EACCES 
  57. _getpid()                                       = 241908 
  58. accessx("/etc/passwd", 04, 0)                   = 0 
  59. statx("/etc/passwd", 0x0FFFFFFFFFFF7880, 176, 0) = 0 
  60. _getpid()                                       = 241908 
  61. accessx("/etc/passwd", 04, 0)                   = 0 
  62. statx("/etc/passwd", 0x0FFFFFFFFFFF7040, 176, 0) = 0 
  63. accessx("/etc/passwd", 04, 0)                   = 0 
  64. statx("/etc/passwd", 0x0FFFFFFFFFFF7100, 176, 0) = 0 
  65. _getpid()                                       = 241908 
  66. accessx("/etc/passwd", 04, 0)                   = 0 
  67. statx("/etc/passwd", 0x0FFFFFFFFFFF7000, 176, 0) = 0 
  68. accessx("/etc/security/passwd", 04, 0)          Err#13 EACCES 
  69. accessx("/etc/passwd", 04, 0)                   = 0 
  70. statx("/etc/passwd", 0x0FFFFFFFFFFF6D30, 176, 0) = 0 
  71. accessx("/etc/passwd", 04, 0)                   = 0 
  72. statx("/etc/passwd", 0x0FFFFFFFFFFF6DF0, 176, 0) = 0 
  73. _getpid()                                       = 241908 
  74. accessx("/etc/security/passwd", 04, 0)          Err#13 EACCES 
  75. accessx("/etc/passwd", 04, 0)                   = 0 
  76. close(4)                                        = 0 
  77. lseek(3, 18944, 0)                              = 18944 
  78. kread(3, "\00F0413\0\0\0 b0414\0\0".., 512)     = 512 
  79. kwrite(1, " C o n n e c t i n g   t".., 77)     = 77 
  80. kfcntl(1, F_GETFL, 0x0000000000000008)          = 2 
  81. getdomainname(0x0FFFFFFFFFFF66B0, 256)          = 0 
  82. open("/etc/hosts", O_RDONLY)                    = 4 
  83. kioctl(4, 22528, 0x0000000000000000, 0x0000000000000000) Err#25 ENOTTY 
  84. kfcntl(4, F_SETFD, 0x0000000000000001)          = 0 
  85. kioctl(4, 22528, 0x0000000000000000, 0x0000000000000000) Err#25 ENOTTY 
  86. kread(4, " #   @ ( # ) 4 7\t 1 . 1".., 4096)    = 2026 
  87. kread(4, " #   @ ( # ) 4 7\t 1 . 1".., 4096)    = 0 
  88. close(4)                                        = 0 
  89. socket(2, 1, 0)                                 = 4 
  90. getsockopt(4, 65535, 4104, 0x0FFFFFFFFFFF7644, 0x0FFFFFFFFFFF7640) = 0 
  91. connext(4, 0x0000000110603D30, 16) (sleeping...)

再不停的重新connext这个过程。

  1. [$(hostname):oracle:/home/oracle]ping cdolm2 
  2. PING cdolm2: (10.10.123.223): 56 data bytes 
  3. 没有反应了，ctrl+c结局 
  4. ^C 
  5. ----cdolm2 PING Statistics---- 
  6. 4 packets transmitted, 0 packets received, 100% packet loss 


  1. [$(hostname):oracle:/home/oracle]cat /etc/hosts 
  2. 127.0.0.1               loopback localhost      # loopback (lo0) name/address 
  3. 10.0.0.6        cdolm2-priv   
  4. 192.168.0.221   cdolm1  
  5. 10.0.0.5        cdolm1-priv 
  6. 192.168.0.232   cdolm2-vip 
  7. 192.168.0.231   cdolm1-vip 
  8.  
  9. 10.10.123.223   cdolm2 cdolm2  /fdfd2 
  10. 192.168.1.250   cdolm2 
  11.  
  12. 192.168.1.251   cdolm2 
  13. 发现HOSTS文件不正确。

修改hosts

  1. [$(hostname):oracle:/home/oracle]set -o vi 
  2. [$(hostname):oracle:/home/oracle]ifconfig -a 
  3. en0: flags=4e080863,80<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,PSEG,CHAIN> 
  4.         inet 192.168.1.250 netmask 0xffffff00 broadcast 192.168.1.255 
  5. lo0: flags=e08084b<UP,BROADCAST,LOOPBACK,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT> 
  6.         inet 127.0.0.1 netmask 0xff000000 broadcast 127.255.255.255 
  7.         inet6 ::1/0 
  8.          tcp_sendspace 131072 tcp_recvspace 131072 rfc1323 1 
  9.           
  10.           
  11.           
  12. 修改hosts文件 
  13.  
  14. 192.168.1.250   cdolm2

启动正常

  1. 启动正常 
  2. [$(hostname):oracle:/u01/app/oracle/10.2.0/db_1/network/admin]lsnrctl start 
  3.  
  4. LSNRCTL for IBM/AIX RISC System/6000: Version 10.2.0.1.0 - Production on 20-MAR-2013 21:56:37 
  5.  
  6. Copyright (c) 1991, 2005, Oracle.  All rights reserved. 
  7.  
  8. Starting /u01/app/oracle/10.2.0/db_1/bin/tnslsnr: please wait... 
  9.  
  10. TNSLSNR for IBM/AIX RISC System/6000: Version 10.2.0.1.0 - Production 
  11. System parameter file is /u01/app/oracle/10.2.0/db_1/network/admin/listener.ora 
  12. Log messages written to /u01/app/oracle/10.2.0/db_1/network/log/listener.log 
  13. Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=cdolm2)(PORT=1521))) 
  14. Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC0))) 
  15.  
  16. Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=cdolm2)(PORT=1521))) 
  17. STATUS of the LISTENER 
  18. ------------------------ 
  19. Alias                     LISTENER 
  20. Version                   TNSLSNR for IBM/AIX RISC System/6000: Version 10.2.0.1.0 - Production 
  21. Start Date                20-MAR-2013 21:56:37 
  22. Uptime                    0 days 0 hr. 0 min. 1 sec 
  23. Trace Level               off 
  24. Security                  ON: Local OS Authentication 
  25. SNMP                      OFF 
  26. Listener Parameter File   /u01/app/oracle/10.2.0/db_1/network/admin/listener.ora 
  27. Listener Log File         /u01/app/oracle/10.2.0/db_1/network/log/listener.log 
  28. Listening Endpoints Summary... 
  29.   (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=cdolm2)(PORT=1521))) 
  30.   (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC0))) 
  31. Services Summary... 
  32. Service "PLSExtProc" has 1 instance(s). 
  33.   Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service... 
  34. The command completed successfully 
 
您可能感兴趣的文档:
点击免费下载>>软考高级考试备考技巧/历年真题/备考精华资料

--结束END--

本文标题: lsnrctl start启动监听很慢(AIX平台)

本文链接: https://www.lsjlt.com/news/43357.html(转载时请注明来源链接)

有问题或投稿请发送至: 邮箱/279061341@qq.com    QQ/279061341

本篇文章演示代码以及资料文档资料下载

下载Word文档到电脑，方便收藏和打印～

下载Word文档
去做题
猜你喜欢
  • lsnrctl start启动监听很慢(AIX平台)
    今天登陆了一下公司AIX平台的ORACLE测试服务器，没有配置监听，由于手动配置监听后，启动监听，发现启动的时候很慢，日志如下： 欢迎大家加入ORACLE超级群：17115662 免费解决各种O...
    99+
    2022-10-18
  • 通过lsnrctl stop、lsnrctl start无法启动Oracle dblink的监听怎么办
    本篇内容介绍了“通过lsnrctl stop、lsnrctl start无法启动Oracle dblink的监听怎么办”的有关知识，在实际案例的操作过程中，不少人都会遇到这样的困境，接下来就让小编带领大家学...
    99+
    2022-10-18
软考高级职称资格查询
软考职称历年真题下载
软考职称资料下载
热门wiki
近期文章
推荐阅读
热门问答
热门标签
编程网，编程工程师的家园，是目前国内优秀的开源技术社区之一，形成了由开源软件库、代码分享、资讯、协作翻译、讨论区和博客等几大频道内容，为IT开发者提供了一个发现、使用、并交流开源技术的平台。

  • 官方手机版

  • 微信公众号

  • 商务合作